| View previous topic :: View next topic |
| Author |
Message |
TXcoupe
petrol head
Joined: 05 Oct 2001
Posts: 1675
|
 Posted: Sun Nov 25, 2001 4:24 pm Post subject: hey ben wight |
 |
|
| hey ben do you know the float level for the 32/36 weber cause im gonna do the float level as she is playiong up again and i think i have a blocked pressure relief valve as she blew a oil filter seal and the pressure gauge went off the clock.... |
|
| Back to top |
|
 |
Ben Wight
backyard mechanic
Joined: 04 Oct 2001
Posts: 946
|
| Posted: Sun Nov 25, 2001 9:33 pm Post subject: Re: hey ben wight |
|
|
I think the measurement is 35mm off the top of my head, I'll get back to you if that is incorrect.
Its measured from the mounting surface of the carby lid, to the bottom of the float, whilst you are holding the float/lid vertically, so the float cannont put pressure on the spring in the needle.
It does sound like you might have a blocked pressure relief valve, pain in the ass. Does it go off the clock whilst idling hot, or just cold, or just high revs?
Ben Wight |
|
| Back to top |
|
|
TXcoupe
petrol head
Joined: 05 Oct 2001
Posts: 1675
|
| Posted: Mon Nov 26, 2001 2:07 am Post subject: Re: hey ben wight |
|
|
| its has high pressure at idle @ 1500 rpm bout 60 psi and at driving speeds id going higher and higher than when i reach 130 its oiff the clock |
|
| Back to top |
|
|
|
