| View previous topic :: View next topic |
| Author |
Message |
20PSI TX
tinkerer
Joined: 23 Oct 2001
Posts: 475
|
 Posted: Mon Sep 16, 2002 5:20 am Post subject: parts to go SA |
 |
|
Im just trying to get rid of some parts that I dont need. What I can remeber I have TG panels all in very good condition, Twin dellorotos on manifold need fixing, 34 adm webber with adapter plate, Airconditioner pump and fittings, crack free TG dash, alternators, starter motors, whole TG so any little fiddly bits I could possibly have, lots motor stuff lying around.
If you need anything ask I might have just what want.
Im in adelaide
CHEERS
JOSH |
|
| Back to top |
|
 |
gottageme4free
rice boy
Joined: 12 Aug 2002
Posts: 22
|
| Posted: Mon Sep 16, 2002 2:27 pm Post subject: Re: parts to go SA |
|
|
| Do you have a exhaust in reasonable condition |
|
| Back to top |
|
|
20PSI TX
tinkerer
Joined: 23 Oct 2001
Posts: 475
|
| Posted: Mon Sep 16, 2002 3:55 pm Post subject: Re: parts to go SA |
|
|
| no sorry the only one I have is about to be put on my run about |
|
| Back to top |
|
|
biteme
tinkerer
Joined: 16 Sep 2002
Posts: 52
|
| Posted: Mon Sep 16, 2002 8:11 pm Post subject: Re: parts to go SA |
|
|
| what size are the dellorotos what needs fixing and how much |
|
| Back to top |
|
|
simon96
rice boy
Joined: 21 Oct 2001
Posts: 46
|
| Posted: Mon Sep 16, 2002 11:47 pm Post subject: Re: parts to go SA |
|
|
any wheels, 14 inch mags or a camshaft other than a stock one or a 1.6, 1.8 head, how much for any of th eabove
cheers simon |
|
| Back to top |
|
|
GROOV3
petrol head
Joined: 04 Oct 2001
Posts: 3682
|
| Posted: Tue Sep 17, 2002 1:18 am Post subject: Re: parts to go SA |
|
|
what colour is it
im after a front drivers door in blue |
|
| Back to top |
|
|
20PSI TX
tinkerer
Joined: 23 Oct 2001
Posts: 475
|
| Posted: Tue Sep 17, 2002 4:15 am Post subject: Re: parts to go SA |
|
|
not sure whats wrong probably just needs rejetting never really looked into it had the car up on the dyno just for a tune and it was running real lean on accelaration they ran out of adjustment. Dont really know much about carbies going efi myself. When driving it had a flat spot all the way to about 2500rpm then it was pretty much fine. Probably $250
Yes I do have a door its got a little surface rust at the chrome strip under the window not much at all and a bit inside the door under the trim. It has also been broken into before so around the lock is a little worse for wear. |
|
| Back to top |
|
|
20PSI TX
tinkerer
Joined: 23 Oct 2001
Posts: 475
|
| Posted: Tue Sep 17, 2002 4:17 am Post subject: Re: parts to go SA |
|
|
no sorry no wheel just lots of bald stockies. As for the cam I just sold one sorry no more.
JOSH |
|
| Back to top |
|
|
WAY2LOWatwork
tinkerer
Joined: 02 Apr 2002
Posts: 188
|
| Posted: Tue Sep 17, 2002 11:54 am Post subject: Re: parts to go SA |
|
|
| u wouldnt sell 1 of the carbs singlely??? |
|
| Back to top |
|
|
biteme
tinkerer
Joined: 16 Sep 2002
Posts: 52
|
| Posted: Tue Sep 17, 2002 1:00 pm Post subject: Re: parts to go SA |
|
|
| what size are they eg 42 45 48 and would you cod them i want them what is the manifold like |
|
| Back to top |
|
|
20PSI TX
tinkerer
Joined: 23 Oct 2001
Posts: 475
|
| Posted: Wed Sep 18, 2002 4:16 am Post subject: Re: parts to go SA |
|
|
| nah sorry preffer to get rid of them together |
|
| Back to top |
|
|
20PSI TX
tinkerer
Joined: 23 Oct 2001
Posts: 475
|
| Posted: Wed Sep 18, 2002 4:18 am Post subject: Re: parts to go SA |
|
|
| sorry forgot to mention 40mm its an s bend type lynx mainfold. if cant find a buyer locally |
|
| Back to top |
|
|
biteme
tinkerer
Joined: 16 Sep 2002
Posts: 52
|
| Posted: Thu Sep 19, 2002 7:44 pm Post subject: Re: parts to go SA |
|
|
| have you sold them yet i still want them |
|
| Back to top |
|
|
|
