View previous topic :: View next topic |
Author |
Message |
Gold TX Sleeper backyard mechanic
Joined: 05 Feb 2002 Posts: 509
|
Posted: Wed Feb 05, 2003 8:53 pm Post subject: 4ZD1 Inlet/Exhaust manifolds |
|
|
After doing countless hours of searching and researching on dropping the 4ZD1 into my TX, i couldn't find anything that states whether the extractors/exhaust manifold or inlet manifold from my G200, or any G series engine for that matter bolt on. Everything else seems reasonably straight forward.
Does anyone know if the G series manifolds have the same bolt and port locations and bolt on like the gearboxes do ? If they do, then the cost of decent extractors and the ability to fit twin webbers will be alot easier for me.
There seems to be a fair amount of streetable torque to be had in these engines with a few extra mods in the right places.
Cheers,
Jasyn... |
|
Back to top |
|
|
austin rice boy
Joined: 27 Jan 2003 Posts: 25
|
Posted: Wed Feb 05, 2003 11:11 pm Post subject: Re: 4ZD1 Inlet/Exhaust manifolds |
|
|
i kno for a fact after bolting my old extracors on a mates 2.6 redeo a few yrs ago ....the exhuast is no probs , but i dont kno about the inlet sorry |
|
Back to top |
|
|
|