View previous topic :: View next topic |
Author |
Message |
Mr bayce tinkerer
Joined: 26 May 2002 Posts: 328
|
Posted: Mon Mar 17, 2003 9:18 pm Post subject: ##Getting there :D## |
|
|
i got the new motor running again today (after having 2Xrow chain etc. fixed) and it idles ok (very lumpy coz of cam ) but it doesnt like the accelerator pedal!! it just missed like a bitch and sorta dies. timing is at about 6 degrees, had a fiddle with mixture, i think the plugs are right but yeah its not drivable
another thing is i noticed the tacho needle jumps around a bit when it misses, does this mean its the coil or wiring or something??
PS. its a worked g180
also does anyone know a REALLY GOOD mobile mechanic? someone who knows their shit (unlike most) brisbane area? i know its a contradiction in terms but its worth a try
thanx matt |
|
Back to top |
|
|
MR_GEMI hod rodder
Joined: 05 Oct 2001 Posts: 7826 Location: Adelaide
|
Posted: Mon Mar 17, 2003 9:31 pm Post subject: Re: ##Getting there :D## |
|
|
6 degrees seems a little low for a worked off its nut donk... _________________
|
|
Back to top |
|
|
Mr bayce tinkerer
Joined: 26 May 2002 Posts: 328
|
Posted: Mon Mar 17, 2003 9:58 pm Post subject: Re: ##Getting there :D## |
|
|
i tried every where from 4 to about 25 degrees!
No good |
|
Back to top |
|
|
tx1975 tinkerer
Joined: 21 May 2002 Posts: 321
|
Posted: Mon Mar 17, 2003 10:03 pm Post subject: Re: ##Getting there :D## |
|
|
on my g180 i had to advance the timing chain around one tooth to get the right timing |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Mon Mar 17, 2003 10:44 pm Post subject: anyone know a REALLY GOOD mobile mechanic? |
|
|
YES!!! and he is a gemini FREEEEEKKK!!!!
RPM mobile mechanics
0422147437
very wll priced aswell _________________
|
|
Back to top |
|
|
Mr bayce tinkerer
Joined: 26 May 2002 Posts: 328
|
Posted: Mon Mar 17, 2003 10:47 pm Post subject: Re: anyone know a REALLY GOOD mobile mechanic? |
|
|
sweet thanx, i might see if he can come out tomorrow |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Tue Mar 18, 2003 9:58 am Post subject: Re: ##Getting there :D## |
|
|
sounds like your carb isn't working properly, check that the accelerator pump is squirting fuel properly. |
|
Back to top |
|
|
Mr bayce tinkerer
Joined: 26 May 2002 Posts: 328
|
Posted: Tue Mar 18, 2003 5:25 pm Post subject: Re: ##Getting there :D## |
|
|
it squirts fuel fine , out of both sides (if you mean when you pump it) but i cant push the pedal down more than 10mm or it starts missing real bad
could the cam not be timed properly maybe? |
|
Back to top |
|
|
BlueTC petrol head
Joined: 22 Oct 2002 Posts: 1148
|
Posted: Tue Mar 18, 2003 5:36 pm Post subject: Re: ##Getting there :D## |
|
|
Sounds like an ignition prob?
is it slow to build up power after accelerating?
i dunno, sounds to ballistic for my knowledge
regards |
|
Back to top |
|
|
Mr bayce tinkerer
Joined: 26 May 2002 Posts: 328
|
Posted: Tue Mar 18, 2003 8:06 pm Post subject: Re: ##Getting there :D## |
|
|
yeah the revs will climb - slowly (with alot of missing) but then when you let the acc off it will usually stall
hmm |
|
Back to top |
|
|
Soop backyard mechanic
Joined: 30 May 2002 Posts: 748
|
Posted: Tue Mar 18, 2003 11:02 pm Post subject: Re: ##Getting there :D## |
|
|
Is it running too rich maybe ?
Try upgrading your coil to a bosch gt40 one to give the spark more guts.
Just an idea. |
|
Back to top |
|
|
|