|
View previous topic :: View next topic |
Author |
Message |
76gemini rice boy
Joined: 12 Feb 2003 Posts: 33
|
Posted: Sat Mar 22, 2003 7:18 pm Post subject: Vn 6 to fit Gemini |
|
|
Has anyone done this mod and if so what complications did you come across
Nate |
|
Back to top |
|
|
IDAREU2 tinkerer
Joined: 07 Oct 2001 Posts: 423
|
Posted: Sat Mar 22, 2003 7:46 pm Post subject: Re: Vn 6 to fit Gemini |
|
|
go down the list and youll see shit loads of info on the v6 into gemini...
we about now are getting fukin sick of this question....
cheers |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Sun Mar 23, 2003 1:30 pm Post subject: Re: Vn 6 to fit Gemini |
|
|
*bits tounge, and holds back nasty words* _________________
|
|
Back to top |
|
|
td gem now tg gem tinkerer
Joined: 21 Nov 2002 Posts: 82
|
Posted: Sun Mar 23, 2003 6:26 pm Post subject: Re: Vn 6 to fit Gemini |
|
|
mate.....fuck off....u ask this question every week........find out a company that does these conversions and talk to them .....uve already asked every one on here.........and got no help.take the hint
cheers
dave |
|
Back to top |
|
|
TGemi1 tinkerer
Joined: 23 Mar 2003 Posts: 456
|
Posted: Sun Mar 23, 2003 10:27 pm Post subject: Re: Vn 6 to fit Gemini |
|
|
COMMODORE V6 3.8LTR EFI ENGINE
INTO
HOLDEN GEMINI .
V6 Conversions have developed a conversion kit that allows the instillation of the Holden Commodore V6 3.8ltr EFI to the above vehicle from VN to VX, the kit is designed to replace the original 4 cylinder motor & gearbox. The kit is designed to take the T700 or T5 gearbox.
To comply with Australian emission laws the engine must have been manufactured the same year or later than the vehicle. The engine must also have all of the emission components connected, including the catalytic converter. The engine must also be run on unleaded fuel or LPG.
In Australia an Engineers report is required after the conversion has been completed. Contact your local RTA office for a list of Engineers
CONVERSION INFORMATION
This is a very simple conversion with only a slight modification to power buster mounting bracket area to obtain clearance for the cylinder head.
Our engine mount brackets utilise the original engine mount rubbers and our gearbox crossmember is a bolt in using the VN gearbox rubber mount.
You will need to obtain the following components -
* The Commodore V6 engine complete with the main engine wiring harness, the ECM computer and memcal. Other accessories such as the map sensor, purge canister, air cleaner & ducting, airconditioning compressor & catalytic converter, external fuel pump & damper.The Series One engines have two crankshaft bolt patterns and starter motor types, the manual transmission type and the automatic transmission type. For this reason they are not interchangeable.
However, Series Two and later engines have the same crankshaft so they can be converted from automatic to manual by fitting a flywheel and changing the memcal.
This only applies to VN and VP engines, VR and later engines have different computers and wiring looms for automatic and manual.
You can leave your original fuel tank in place by using an external EFI fuel pump and modifying the filler neck by way of a return line and restrictor so that it will only accept an UNLEADED nozzle or you can fit a complete fuel tank from the VN Commodore.
The V6 motor does not have an engine driven fan, you can use your original radiator and fit the fan and cowling from the VR - VT or a 16" Davies Craig or similar.
The wiring kit we have available covers from the VN - VX it comes in 2 parts, the under bonnet loom with all the relays and fuses and the under dash loom which incorporates an engine trouble light. The wiring kit plugs into the V6 engine and gearbox loom leaving only 6 wires to be tapped into your vehicles original loom, which are - alternator light, oil light, temp light or gauge, ignition, starter & tacho.
Our speedo kit comes in 2 forms, an in line speed sensor that fits the T700 or T5 and cable to suit VN - VP, or an electronic speedo for VR - VX instillations.
KIT CONTENTS.
* sump & oil pickup
* dipstick tube
* engine mounts, brackets & bolts
* gearbox crossmember
* speedo kit
* wiring kit
* a set of instructions
Kit price - $1,300.00 this includes GST & freight.
EFI fuel pump - $200.00
16" thermo fan - $200.00
Idler kit VN - VR - $150.00
" " VS - VT - $175.00 this is to be used if not running power steering.
Body Control Simulator VR-VS - $300.00
Body Control Simulator VT-VX - $400.00
If you have any further questions not covered in this information sheet please contact us for further information.
Website design and graphics
© Brad Adams 2000
Pat Gardner V6 Conversion Specialist
Moree, NSW, Australia
Tel: 02 6751 1243
E-mail: v6conversions@bigpond.com
Last updated Wednesday, September 19, 2001
JUST SUM INFO I FOUND THAT MIGHT B USEFULL, I'M CONSIDERING THIS, ANY1 GOT ANY INPUT?
chris...
===============================================
there u knob , i posted this bout 2months ago in R&D, so sure u do your searchin, now fuck off b4 i mac mutha fuckin slap ya. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|