View previous topic :: View next topic |
Author |
Message |
spud petrol head
Joined: 05 Apr 2002 Posts: 1106
|
Posted: Thu May 01, 2003 8:24 pm Post subject: brake help please |
|
|
ok so my brakes were not working to well so i decided it was time to bleed them. after doing the rear ones i checked how firm the dedal felt, and it was pretty good. then i got back under the car and did the fron 2. when i hoped back in my car to drive again they dont work at all now. peddal goes straight to the floor. any sugestions on what has happened? thanks |
|
Back to top |
|
|
FLYINLoW backyard mechanic
Joined: 08 Oct 2001 Posts: 924
|
Posted: Thu May 01, 2003 8:28 pm Post subject: Re: brake help please |
|
|
yeah uve probably made it ten times worse filled the lines with air
you are meant to bleed them one after the other starting at rear left, rear right, front left, front right
from furthest away from booster to closest
if u have no pedal thats prob why. |
|
Back to top |
|
|
spud petrol head
Joined: 05 Apr 2002 Posts: 1106
|
Posted: Thu May 01, 2003 8:37 pm Post subject: Re: brake help please |
|
|
i am fully aware of how to bleed brakes. i did it in the right order. had my mate in the drivers seat doing the pedal bit. and always checking the resovware to make sure it didnt run out of fluid |
|
Back to top |
|
|
FLYINLoW backyard mechanic
Joined: 08 Oct 2001 Posts: 924
|
Posted: Thu May 01, 2003 8:53 pm Post subject: Re: brake help please |
|
|
well the only way u got no pedal is a u have no juice or b u got air in the lines was all i was saying |
|
Back to top |
|
|
spud petrol head
Joined: 05 Apr 2002 Posts: 1106
|
Posted: Thu May 01, 2003 8:59 pm Post subject: Re: brake help please |
|
|
neither of those have happened. evo thinks the piston in the master might be the prob |
|
Back to top |
|
|
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
Posted: Thu May 01, 2003 9:01 pm Post subject: Re: brake help please |
|
|
Yeah flyinlow, if they go to the end of travel sometimes they dont come back. only is a problem when bleeding coz obviously there's pressure to stop it normally. |
|
Back to top |
|
|
Steven rice boy
Joined: 13 Aug 2002 Posts: 31
|
Posted: Thu May 01, 2003 9:33 pm Post subject: Re: brake help please |
|
|
My first TD was a bitch to bleed. Try with motor running to keep booster pressure up. If this fails reset proprtioning valve by unscrewing switch |
|
Back to top |
|
|
spud petrol head
Joined: 05 Apr 2002 Posts: 1106
|
Posted: Thu May 01, 2003 9:39 pm Post subject: Re: brake help please |
|
|
think i may have to take it to work and put it up on the hoist and try again. but if that piston in the master cylinder is the problem i am in trouble |
|
Back to top |
|
|
blewgem rice boy
Joined: 27 Apr 2003 Posts: 41
|
Posted: Thu May 01, 2003 9:48 pm Post subject: Re: brake help please |
|
|
why |
|
Back to top |
|
|
spud petrol head
Joined: 05 Apr 2002 Posts: 1106
|
Posted: Fri May 02, 2003 9:31 am Post subject: Re: brake help please |
|
|
cause it means more work. and i have just about had it with this car. |
|
Back to top |
|
|
blewgem rice boy
Joined: 27 Apr 2003 Posts: 41
|
Posted: Fri May 02, 2003 9:50 pm Post subject: Re: brake help please |
|
|
did ya find prob with brakes |
|
Back to top |
|
|
spud petrol head
Joined: 05 Apr 2002 Posts: 1106
|
Posted: Sat May 03, 2003 7:44 pm Post subject: Re: brake help please |
|
|
didnt even look. went house hunting instead |
|
Back to top |
|
|
|