View previous topic :: View next topic |
Author |
Message |
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Mon Jun 02, 2003 11:14 pm Post subject: Valve springs... |
|
|
Hey people
I stripped down my big vanve head today off my 1.6L getting it ready to go on the brand new G180 block and when I unbolted the rocker gear and cleaned the head up a bit a found that my outter valve springs were a bit loose... Not loose as such but i can move them around??? I have been running this head with a stage 3 crow cam and I'm wondering if the lift of the cam has squashed the valve springs???
Thanks, Josh WA |
|
Back to top |
|
|
ExGem tinkerer
Joined: 10 Feb 2003 Posts: 110
|
Posted: Mon Jun 02, 2003 11:37 pm Post subject: Re: Valve springs... |
|
|
That is more than likely what has caused it. With a big lift cam you should always run heavy duty springs in Gemini engines I have found that double falcon 250 springs are the best. |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Mon Jun 02, 2003 11:46 pm Post subject: Re: Valve springs... |
|
|
Thanks man, I'll have to look into that one. Crow cams make a set of h/d valve springs for $40 so thats probley why they make then
cheers |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Tue Jun 03, 2003 11:13 am Post subject: Re: Valve springs... |
|
|
get rr4 double valve springs.
i could rev to 7000rpm with out any valve bounce using these springs and a big cam _________________
|
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Tue Jun 03, 2003 2:05 pm Post subject: Re: Valve springs... |
|
|
$40????
Mine cost $100. Who quoted you that price?
Ben |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Tue Jun 03, 2003 3:02 pm Post subject: Re: Valve springs... |
|
|
yeah that dont sound right. my rr4's were $90 (cost price threw my bro's buisness)
$40 for maybe stock or 2nd hand. lol _________________
|
|
Back to top |
|
|
hypaTG backyard mechanic
Joined: 15 Oct 2002 Posts: 524
|
Posted: Tue Jun 03, 2003 7:53 pm Post subject: Re: Valve springs... |
|
|
i think they make high pressure ones and even higher pressure ones. i can't remember the pressure rates, but i got quoted about $60 and $80 respectively. |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Tue Jun 03, 2003 8:53 pm Post subject: Re: Valve springs... |
|
|
Crow cams make whats called a heavy duty valve spring, thats the only one they have in their catalogue for a gemini. |
|
Back to top |
|
|
Gold TX Sleeper backyard mechanic
Joined: 05 Feb 2002 Posts: 509
|
Posted: Wed Jun 04, 2003 12:28 am Post subject: Re: RR4 Valve springs... |
|
|
Gene, whats the go with the RR4 valve springs ? Is that the brand name ? Where can they be sourced ? AutoBarn etc.. |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Wed Jun 04, 2003 12:37 pm Post subject: Re: RR4 Valve springs... |
|
|
yeah there a brand. i got em threw my brother. i will find out where u can get em and let u know _________________
|
|
Back to top |
|
|
|