View previous topic :: View next topic |
Author |
Message |
wheelnut rice boy
Joined: 03 Jun 2003 Posts: 35
|
Posted: Thu Jun 26, 2003 12:37 am Post subject: billet cam |
|
|
40 80 grind , $100, in brisbane, 0410730195, nathan |
|
Back to top |
|
|
Gold TX Sleeper backyard mechanic
Joined: 05 Feb 2002 Posts: 509
|
Posted: Thu Jun 26, 2003 8:21 pm Post subject: Re: billet cam |
|
|
Interesting, if you can tell me whether a valve releif job on the pistons needs to be performed then i am a definate buyer. I'm going to build a motor, but if i can use your cam without fly-cuts on my existing motor then i'd be very happy.
BTW, whats the rev range on that puppy, 3000rpm-7000rpm ?? |
|
Back to top |
|
|
TGNVD247 tinkerer
Joined: 04 Nov 2002 Posts: 470
|
Posted: Thu Jun 26, 2003 9:17 pm Post subject: Re: billet cam |
|
|
4000-8000 |
|
Back to top |
|
|
wheelnut rice boy
Joined: 03 Jun 2003 Posts: 35
|
Posted: Fri Jun 27, 2003 2:03 am Post subject: Re: billet cam |
|
|
the motor this cam was on had flycuts, but it was a really tired 1600 that had no compression, power was between 4000 7500, 0410730195 |
|
Back to top |
|
|
Mystikal newbie
Joined: 17 Jun 2003 Posts: 8
|
Posted: Sun Jun 29, 2003 6:48 pm Post subject: Re: billet cam |
|
|
40/80 umm not sure about the grind codes, umm is that pritty lumpy cause if it is dont bother but i neeed a performance cam for performance use |
|
Back to top |
|
|
wheelnut rice boy
Joined: 03 Jun 2003 Posts: 35
|
Posted: Mon Jun 30, 2003 12:21 am Post subject: Re: billet cam |
|
|
hey there Mystikal, this cam is a little lumpy, it will make great power over 4000rpm
0410730195 if you still interested
Nathan |
|
Back to top |
|
|
|