View previous topic :: View next topic |
Author |
Message |
jims tinkerer
Joined: 30 May 2002 Posts: 102
|
Posted: Mon Jun 30, 2003 6:21 pm Post subject: FS: Worked 1600 |
|
|
Ok Guys, last call before I pull it apart:
Fully worked 1600cc, fully balanced, ported and polished TX head, big custom cam, heavy duty valve springs, match ported Lynx manifold, twin 40mm sidedraft webers, spare set of filter socks, hurricane extractors, chrome rocker cover, reconditioned alternator, starter motor, $1600 the lot negotiable
OR If anyone is interested in parts of it, I will sell it in pieces, block, head, cam, webers and inlet, extractors, etc. The people that have already contacted me regarding parts of it will have first choice.
also still have:
- 2 x Velo Milano Racing Seats, $330 each
- 6 point Bond alloy roll cage with all padding and side intrusion bars, $300 (can be used as half rear cage)
- standard height, heavy duty Pedders springs, $80 each pair (done ~2000km)
- 1.5" lowered Pedders springs $60 for set of 4
- Reconditioned 5speed gearbox, $180
- Master cylinder with remote reservoir, $50
- Performance mags, 13" x 6" ok tyres, $70
- All panels, doors, guards, etc
- 6 x Maxsport 175/75/13 rally tyres on Gemini steel rims, $420
Plus all the rest, trim, diff, torque tube, rebuilt brakes, freshly re-ground disks, lights, spare block, heads, electrical bits, etc, etc
All prices negotiable.
In Sydney, can arrange for delivery around Sydney, call me if interested on 0408 417 407.
Jim. |
|
Back to top |
|
|
dumped TE tinkerer
Joined: 27 Jun 2003 Posts: 76
|
Posted: Mon Jun 30, 2003 6:27 pm Post subject: Re: FS: Worked 1600 |
|
|
How much for the webers on their own?
Would you be able to post to South Australia? |
|
Back to top |
|
|
gemma rice boy
Joined: 18 Feb 2003 Posts: 27
|
Posted: Mon Jun 30, 2003 6:27 pm Post subject: Re: FS: Worked 1600 |
|
|
how much for sidedraft webers and would u consider c.o.d them |
|
Back to top |
|
|
jims tinkerer
Joined: 30 May 2002 Posts: 102
|
Posted: Mon Jun 30, 2003 7:05 pm Post subject: Re: FS: Worked 1600 |
|
|
I would like them to go with the manifold.
$750 ono including ram tubes, a spare set of filters all linkages and a spare set of jets etc to suit 1800 or 2L.
The were fully rebuilt 1 year ago, with all parts brand new. COD is ok.
Jim. |
|
Back to top |
|
|
low12s rice boy
Joined: 30 Nov 2002 Posts: 27
|
Posted: Mon Jun 30, 2003 9:05 pm Post subject: Re: FS: Worked 1600 |
|
|
how much did you want for the tx head? |
|
Back to top |
|
|
rod tinkerer
Joined: 14 Apr 2003 Posts: 380
|
Posted: Mon Jun 30, 2003 11:20 pm Post subject: Re: FS: Worked 1600 |
|
|
Dont stuff me around here Jimbo mate. i pulled that smicko monsta tacho out off my gemgem for u today... |
|
Back to top |
|
|
jims tinkerer
Joined: 30 May 2002 Posts: 102
|
Posted: Mon Jun 30, 2003 11:57 pm Post subject: Re: FS: Worked 1600 |
|
|
I have two worked heads. One off the engine one on. You are getting the one that is ready to be posted to you. |
|
Back to top |
|
|
rod tinkerer
Joined: 14 Apr 2003 Posts: 380
|
Posted: Tue Jul 01, 2003 12:02 am Post subject: Re: FS: Worked 1600 |
|
|
cheers bud...
hav u weighed it yet? |
|
Back to top |
|
|
jims tinkerer
Joined: 30 May 2002 Posts: 102
|
Posted: Tue Jul 01, 2003 12:25 am Post subject: Re: FS: Worked 1600 |
|
|
Check your email, I have also checked that it has the number 14 cast on it and has no isuzu symbol. According to some it does confirm that it is indeed an early head. |
|
Back to top |
|
|
jims tinkerer
Joined: 30 May 2002 Posts: 102
|
Posted: Tue Jul 01, 2003 12:45 am Post subject: Re: FS: Worked 1600 |
|
|
Someone is looking at the whole engine tommorow. I have to wait till then before I split anything up. Sorry about that.
I would be looking at around $320 including valve springs and cam if I end up spliting it. |
|
Back to top |
|
|
TGemi1 tinkerer
Joined: 23 Mar 2003 Posts: 456
|
Posted: Tue Jul 01, 2003 12:47 pm Post subject: Re: FS: Worked 1600 |
|
|
i'll give u 50 bucks for the pedders springs, will consider buying a head 2. Will need 2 cod 2 adelaide, email me
TGfanatic@hotmail.com
chris... |
|
Back to top |
|
|
jims tinkerer
Joined: 30 May 2002 Posts: 102
|
Posted: Fri Jul 04, 2003 12:09 am Post subject: Re: FS: Worked 1600 SOLD |
|
|
as subject says, motor sold.
Jim. |
|
Back to top |
|
|
|