View previous topic :: View next topic |
Author |
Message |
TURBO TF tinkerer
Joined: 07 Apr 2003 Posts: 171
|
Posted: Sun Jul 06, 2003 3:34 am Post subject: Exhaust stuck |
|
|
how does everyone get the exhaust out? mine is completely undone and cant get it over the diff ive jacked the car up using heaps of different jacks but none have got high enough, its pissing me off coz i hit a bump and put a massice crack in my exhaust just before the diff.... so yeh angle grind the bastard? i dunno, any ideas appreciated.
Thanks |
|
Back to top |
|
|
BonnetJizz tinkerer
Joined: 05 May 2003 Posts: 137
|
Posted: Sun Jul 06, 2003 11:37 am Post subject: Re: Exhaust stuck |
|
|
you tried a hydrolic jack under the diff?
then chuck it on some stands |
|
Back to top |
|
|
GROOV3 petrol head
Joined: 04 Oct 2001 Posts: 3682
|
Posted: Sun Jul 06, 2003 11:54 pm Post subject: Re: Exhaust stuck |
|
|
jack the car up by the diff with a trollie jack then put stands under both sides of the car at the jacking points (not on the back axle) if there still isnt enough room undo the bottem bolt on the shockies and then it will drop the axle alot more and there should be enough room then if not angle grinder is fun |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Mon Jul 07, 2003 11:12 am Post subject: Re: Exhaust stuck |
|
|
iv tryed b4. u have to cut it just b4 the diff. and u have to have the car jacked up NOT by the diff so that the diff hangs down and u can pull the rear 1/2 out over the diff _________________
|
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Mon Jul 07, 2003 11:13 am Post subject: Re: Exhaust stuck |
|
|
will it only work if u use a hydrolic jack ? bummer i only have a sizzor jack and botle jack. why wont these work?
hydrolic jack has ntohgn to do with it _________________
|
|
Back to top |
|
|
TURBO TF tinkerer
Joined: 07 Apr 2003 Posts: 171
|
Posted: Mon Jul 07, 2003 5:38 pm Post subject: Re: Exhaust stuck |
|
|
yeh i got it using a mates hydrolic jack under the diff then put it in car stands under jacking points on the side of the car. cheers guys!! |
|
Back to top |
|
|
|