HotGemini.com - Holden Gemini heaven
Home What's New About Help Contact




holden shuttle radiators

 
Post new topic   Reply to topic    hotgemini.com Forum Index -> Gemini R&D
View previous topic :: View next topic  
Author Message
austin
rice boy


Joined: 27 Jan 2003
Posts: 25

PostPosted: Thu Feb 06, 2003 2:21 am    Post subject: holden shuttle radiators Reply with quote

thats rite the holden shuttle bus has a 2 , 3 & a massive 5 core radiator in them with huge tanks .... they are not a completly bolt in job as you have to drill new holes in the suport brackets... these radiators are fitted to the 1800 that are in these buses .so if you need some serious cooling get one of these ....there dirt cheap
Back to top
View user's profile Send private message
Mr bayce
tinkerer


Joined: 26 May 2002
Posts: 328

PostPosted: Thu Feb 06, 2003 9:33 pm    Post subject: Re: holden shuttle radiators Reply with quote

I found a huge offset 4 core radiator custom fitted to a gem! it works really well.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
workedTE
rice boy


Joined: 19 Feb 2003
Posts: 29

PostPosted: Wed Feb 26, 2003 3:07 am    Post subject: Re: holden shuttle radiators Reply with quote

a cheap old VK radiator does the trick pretty well also.
Back to top
View user's profile Send private message Send e-mail
rodeo bob
rice boy


Joined: 04 Aug 2003
Posts: 24

PostPosted: Mon Aug 04, 2003 2:20 pm    Post subject: Re: holden shuttle radiators Reply with quote

just put a shuttle motor(4ZB1 1.8L) & radiator in my rodeo the bottom hose is on the wrong side (rhs). the shuttle radiator is the same size but mounts in heaps different. its a good sturdy bit of gear though two core with nice heavy fins, its got a cross brace on the front and a few other bits bolted on the front they are eaisly remove and it gives you 8x6mm holes to use to bolt it up. the bit worth mentioning is the mounts on the bottom its got two shouldered studs with rubber gromets. i lined em and drilled two holes and spacered it up a bit to clear the plastic drain plug in the bottom tank. dropped it in the two bottom holes and drilled 2 holes in the radiator support up the top to hold it in. fan shroud fitted around the fan A1, but it would have to be changed to put the bottom hose on the other side. wouldnt want to pay to much for one though, a brand new 3 core was quoted to me for $250. hope i helped someone.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    hotgemini.com Forum Index -> Gemini R&D All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
© HotGemini.com 2000-2007 | Privacy Policy | Terms of Use | Site Map