View previous topic :: View next topic |
Author |
Message |
LOWGEMINI rice boy
Joined: 05 Jun 2003 Posts: 46
|
Posted: Sun Jul 27, 2003 8:28 pm Post subject: 5 stud conversion |
|
|
hey all
just wondering what i need to do to get a 5 stud converson
happening to fit holden rims
cheers adam |
|
Back to top |
|
|
gemvanman CA18 VAN tinkerer
Joined: 20 Oct 2002 Posts: 287
|
Posted: Sun Jul 27, 2003 10:38 pm Post subject: Re: 5 stud conversion |
|
|
i have been told to use vn commodore(cut down to size)axles
and the front hubs have to be redrilled to the commodore stud |
|
Back to top |
|
|
Cammo79TE tinkerer
Joined: 17 Aug 2002 Posts: 448
|
Posted: Mon Jul 28, 2003 12:20 am Post subject: Re: 5 stud conversion |
|
|
common sense would say to just get mags to fit your car |
|
Back to top |
|
|
Reddez tinkerer
Joined: 29 Oct 2002 Posts: 353
|
Posted: Mon Jul 28, 2003 9:21 am Post subject: Re: 5 stud conversion |
|
|
A lot more than its worth, if you're just doin it to fit mags, trust me get mags that fit otherwise you're talking over $500. Approx a coupla hundred to do the front hubs, redrill disks, at least $400 for the rear, really unless you have another reason stick with gemi wheels... |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Mon Jul 28, 2003 3:09 pm Post subject: Re: 5 stud conversion |
|
|
From memory you cannot redrill the front hubs because there is not enough metal on the outter edge to support the larger stud pattern |
|
Back to top |
|
|
Reddez tinkerer
Joined: 29 Oct 2002 Posts: 353
|
Posted: Mon Jul 28, 2003 6:26 pm Post subject: Re: 5 stud conversion |
|
|
That may be so, but Hoppers stoppers has a front hub machined up i'm sure you could buy one without the VX kit, but if you're gonna do it upgrade the brakes too... That was the problem with the rear axles, a ring had to be welded to them to give it more metal to put the 5 stud onto... |
|
Back to top |
|
|
|