View previous topic :: View next topic |
Author |
Message |
DcYpHeR rice boy
Joined: 12 May 2003 Posts: 12
|
Posted: Thu Aug 14, 2003 2:05 pm Post subject: Blocking fuel return line? |
|
|
Hey all,
Im putting a 32/36 webber from a cortina on my gemi at the moment. I have 3 pipes comign off. one i know is the inlet (the one going off on an angle) and the other 2 are fuel return. In the tutorial written by ben wright it says to block these pipes. I have tried putting a piece of tube over the pipe and looping it around and putting the other end on the other pipe but it doesnt fit because there is a hose coming from the radiator and it goes onto the manifold and there isnt anough room to fit another tube over the fuel return to block it. In the tutorial it says to use a brass tee-piece from after the filter? but i have no idea what that is. what have you guys done to block these return pipes?
thanx |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Thu Aug 14, 2003 2:30 pm Post subject: Re: Blocking fuel return line? |
|
|
one is a return the other is a breather _________________
|
|
Back to top |
|
|
DcYpHeR rice boy
Joined: 12 May 2003 Posts: 12
|
Posted: Thu Aug 14, 2003 3:05 pm Post subject: Re: Blocking fuel return line? |
|
|
so what does that mean? do i needa block both? or what do i needa do? |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Thu Aug 14, 2003 4:08 pm Post subject: Re: Blocking fuel return line? |
|
|
only have to block the return line. the tank still needs to brath or it wil suck on itself _________________
|
|
Back to top |
|
|
|