View previous topic :: View next topic |
Author |
Message |
GROOV3 petrol head
Joined: 04 Oct 2001 Posts: 3682
|
Posted: Thu Sep 11, 2003 1:40 pm Post subject: whats a standard rebuilt ....... |
|
|
whats a standard rebuilt consist of?
is a rebuild better than a recondition
whats an average price of a stock 1600 for both |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Thu Sep 11, 2003 4:10 pm Post subject: Re: whats a standard rebuilt ....... |
|
|
rebuild usually consists of new rings (Hone bore)/ bearings/head reco. and gaskets. & assembly
estimate $700
RECO should include: bore & hone, crank grind, new pistons rings bearings gaskets reco head. new oil pump depending on place of work done. & assembly
estimate $1000
& warranty if you are going to flog it get a reco.
cheers |
|
Back to top |
|
|
GROOV3 petrol head
Joined: 04 Oct 2001 Posts: 3682
|
Posted: Thu Sep 11, 2003 4:29 pm Post subject: Re: whats a standard rebuilt ....... |
|
|
hmm interesting
that sort of money isnt just lying around
may just have to drive the bitch till she dies |
|
Back to top |
|
|
rod tinkerer
Joined: 14 Apr 2003 Posts: 380
|
Posted: Thu Sep 11, 2003 4:59 pm Post subject: New Rings 4 a G200... |
|
|
wats the $price$ ??? |
|
Back to top |
|
|
GROOV3 petrol head
Joined: 04 Oct 2001 Posts: 3682
|
Posted: Thu Sep 11, 2003 5:10 pm Post subject: Re: New Rings 4 a G161... |
|
|
Also would like to know ............. |
|
Back to top |
|
|
QldRobbo tinkerer
Joined: 11 Apr 2002 Posts: 455
|
Posted: Thu Sep 11, 2003 8:56 pm Post subject: Re: New Rings 4 a G200... |
|
|
He said in his post an aproximate cost for both? What are you talking about? |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Fri Sep 12, 2003 11:26 am Post subject: Re: New Rings 4 a G200... |
|
|
Yeah what the fuck is going on......
It's all in the first reply........ READ!!!!! |
|
Back to top |
|
|
GROOV3 petrol head
Joined: 04 Oct 2001 Posts: 3682
|
Posted: Fri Sep 12, 2003 11:45 am Post subject: Re: New Rings 4 a G200... |
|
|
i think we were just asking the price of new rings or to get re ringed
not a full re build |
|
Back to top |
|
|
rod tinkerer
Joined: 14 Apr 2003 Posts: 380
|
Posted: Fri Sep 12, 2003 11:56 am Post subject: Re: New Rings 4 a G200... |
|
|
yea just the 4 rings alone |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Fri Sep 12, 2003 11:58 am Post subject: Re: New Rings 4 a G200... |
|
|
it is not worth just replacing rings,
measure your bores to see it it is still within correct size limits and there is no scoring of the bore. otherwise rebore and new pistons and rings.
if you can get away with just rings:
your should hone your bores, and should replace your bearings, and should atleast recut your valves and fit new valve stem seals.
then you need to check the crank. are the bearings worn? is there damage on the crank??? get it ground and bearings to suit.
so you are prob better getting a reco change over from a reputable engine builder. |
|
Back to top |
|
|
|