View previous topic :: View next topic |
Author |
Message |
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
Posted: Tue Sep 16, 2003 9:01 pm Post subject: ATTN: Josh |
|
|
In reference to the Crane cams XR-3000. If you read the XR-700 it says it will do 6000rpm for an 8cyl but more for 4 and 6 cyl. Then the XR-3000 says down the bottom it is the high performance version of the XR-700... so everything that applies to the 700 applies to the 3000 and the features listed on the 3000 are the things that are a bit better...
So yeah she goes over 6500
I've revved it out to 9000rpm without it skipping a beat. Obviously the engine wasnt producing usable power at those rpm, I was just being an idiot at the time |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Tue Sep 16, 2003 10:59 pm Post subject: Re: ATTN: Josh |
|
|
oh ok cool
what coil ya running? |
|
Back to top |
|
|
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
Posted: Wed Sep 17, 2003 12:09 am Post subject: Re: ATTN: Josh |
|
|
just some heap of shit one that was laying around. You need to bypass your ballast resistor and use a coil designed for no resistor |
|
Back to top |
|
|
|