View previous topic :: View next topic |
Author |
Message |
SAM 180 tinkerer
Joined: 06 May 2002 Posts: 482
|
Posted: Thu Oct 30, 2003 2:34 am Post subject: XB Master Cylinder |
|
|
i was talking to Gene about the XB master Cylinder, he said that the XB master bolted straight up so i did a search and one post said that they bolt straight up to TE's but apparently with TG's the bolts are different, is this true, also do i have to upgrade my booster. i have a TG, also i understand i have to extend the pushrod, i can work that shit out. Hopefully. Sam |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Thu Oct 30, 2003 12:02 pm Post subject: Re: XB Master Cylinder |
|
|
mounting bolts may be the same, but the greatest difference is the brake piping, TG TF and Piazza are the same as the Tf & TG have 3 pipes front left and right and rear, where the TE has only 2 pipes.... Probably recomend getting the brake balance unit and pipes from a TE prior to install.
cheers |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Thu Oct 30, 2003 12:22 pm Post subject: Re: XB Master Cylinder |
|
|
u just need the booster with 2 bolt holes for the master instead of 4. my TD one and TE ones work fine with the XB master.
u have to extend the push rod 5-7mm
(look int he R&D, reddez posted exactly everythign u need to do for it) _________________
|
|
Back to top |
|
|
|