| View previous topic :: View next topic |
| Author |
Message |
jimbob03
tinkerer
Joined: 01 Sep 2003
Posts: 292
|
 Posted: Fri Nov 28, 2003 9:00 pm Post subject: bleeding brakes |
 |
|
done them 2day but there still a bit spongie started at the pasenger rear and worked around 2 the frount drivers side toped up res. also sm wanker b4 me tightend the nipple real tight and it snaped off when i did it up again so im fucked now cause i cant get it out. Ne ideas people whats wrong i also did the search not much there
cheers JIMBOB03 |
|
| Back to top |
|
 |
S N 3 A K Y
tinkerer
Joined: 18 Jul 2003
Posts: 153
|
| Posted: Sat Nov 29, 2003 2:23 am Post subject: Re: bleeding brakes |
|
|
Did you snap the rear or the front nipple ? A new wheel cylinder is the easiest/cheapest way out for the rear, and a second-hand caliper is the same for the front.
If they're still spongy and you're confident you did the job right (sounds like you did it in the right order), then maybe you have a small pin hole leak in your lines or the rear wheel cylinders, check thoroughly including the clamps. Or maybe your booster's shagged. Someone else might have a few more ideas for you to ponder.
S N 3 A K Y |
|
| Back to top |
|
|
|
