View previous topic :: View next topic |
Author |
Message |
BlueTC petrol head
Joined: 22 Oct 2002 Posts: 1148
|
Posted: Mon Dec 29, 2003 9:48 pm Post subject: FS EFI G200 DOHC |
|
|
as above
long motor, radiator to tailshaft, pumps etc,
needs fuel computer
make an offer....
Bahh |
|
Back to top |
|
|
GEMN2O rice boy
Joined: 22 Dec 2003 Posts: 34
|
|
Back to top |
|
|
BlueTC petrol head
Joined: 22 Oct 2002 Posts: 1148
|
Posted: Mon Dec 29, 2003 10:04 pm Post subject: Oi Dunger!! |
|
|
U fat chik lover you,
seems good to me,
how is it goin to get up to the northern part of QLD?? |
|
Back to top |
|
|
GEMN2O rice boy
Joined: 22 Dec 2003 Posts: 34
|
Posted: Mon Dec 29, 2003 10:20 pm Post subject: Re: Oi Dunger!! |
|
|
hey man i meant to make it phat chix alright, what does the engine got with it, what computer were u running. is it a five spd. are u getting rid of the whole car if you are i will just get the front of the whole car put on a crate and sent to me, but thats only if you wannt oxy the front of your car off? email me at u kno where
catch foow nate |
|
Back to top |
|
|
BlueTC petrol head
Joined: 22 Oct 2002 Posts: 1148
|
Posted: Mon Dec 29, 2003 10:25 pm Post subject: Re: Oi Dunger!! |
|
|
hahaha,
its is a Isuzu EFI G200 DOHC,
5 Speed Box
Radiator to suit, (Inlet and outlet the same sides)
Starter,
Bosch HP/LV Fuel Pump,
Primer Pump,
Swirl Pot,
i did have a Wold 2D puter ut sold, as i was to upgrade top fuel and ignition,
its not in the car atm its on the grond, beside i woulnt hack BlueTC up anyways, after the diff conversion,
http://www.hotgemini.com/cgi-bin/workshop2.cgi?action=rt&tip_id=103
i do have a pic of the motor in the car, it bolts straight in, just needs a set of headers and a puter and a tuner and all sweet
regards |
|
Back to top |
|
|
GEMN2O rice boy
Joined: 22 Dec 2003 Posts: 34
|
Posted: Tue Dec 30, 2003 5:15 am Post subject: Re: Oi Dunger!! |
|
|
does that turbo gear bolt up? if so how much will u give it to me with the turbo manifold and turbo if u have one, or what is the turbo manifold to suit? |
|
Back to top |
|
|
BlueTC petrol head
Joined: 22 Oct 2002 Posts: 1148
|
Posted: Tue Dec 30, 2003 12:13 pm Post subject: Re: Oi Dunger!! |
|
|
err i did not mention anything about a turbo,
although i do have a turbo, thats is not going with the motor,
you will need a exhaust manifold made up to suit, if extractors may need 4-1's as the starter and engine mounts are close,
but if were to go a turbo manifold a high mount prefferably as the dump pipe can fit in between as described above, |
|
Back to top |
|
|
GEMN2O rice boy
Joined: 22 Dec 2003 Posts: 34
|
Posted: Tue Dec 30, 2003 2:46 pm Post subject: Re: Oi Dunger!! |
|
|
hey mate can u send me some pics of the engine in and out of the car, if u have msn add me it will b easier for the pictures to come through. i_love_fat_chix@hotmail.com
cya nathan |
|
Back to top |
|
|
|