F.S. Twin 40mm Dellortos plus other go fast bits

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

I have the following items that I am thinking of selling if the price is wright (brisbane).

1. Twin dellortos on manifold with linkages and custom stainless air box and pod filter.

2. tx remote reservoir brake booster etc to make it fit.

3. early model big vale head, heavily ported with larger valves again and big ivan tigh cam.

4. Motavator 4-2-1 extractors and 2in exhaust

5. Electronic dissy and ignition module to suit 1600.

6. G161 bottom end, 5sp gbox, G200 bottom end balanced disassembled.

All of this is just out of my car now that the sr20 is going in.

Email me on matt_thompson78@hotmail.com or post here.

Cheers,
Matthew

Josh · backyard mechanic Joined: 04 Oct 2001 Posts: 602

how much for the carbs and manafold without the airbox?

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

I was looking for $500 ono. for the carbs, manifold and airbox together.

The manifold is polished, and the air box will be no real use to me without the carbies. I guess I will see how much interest there is out there.

Matthew

wishv6wish · tinkerer Joined: 28 Dec 2003 Posts: 66

500 for dellortos there worth 300 max

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

If you can get a good set for less than that good luck.
They're worth more than that complete ready to bolt on.
I am negotiable, but the offers need to be reasonable.

DrIFtA · tinkerer Joined: 13 Mar 2003 Posts: 246

Whats the asking on the elect. dizzy + ignit. module ? And why have you specified it to suit a 1600, any particular reason it cant be suited to my G200 ?
And why is the G200 balanced bottom end dissasembled ? Was there something wrong wit it ?

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

Apparantly the shaft on G180 & G200 dizzys are slightly longer. But there is no reason why the sensors can not be placed inside your dizzy (it just bolts in). I was looking for $200 for the dizzy and module.

I bought the G200 in bits. It dropped a valve so the guy pulled it down to see what damage it had. There is a slight mark on the top of the piston from the valve, but nothing to worry about. It was recently rebuilt before this.

I was planning to throw a set of rings and bearings in the G200 and put my head and carbies on it, but in the end I have decided to put in a SR20 instead.

Matthew

wishv6wish · tinkerer Joined: 28 Dec 2003 Posts: 66

how much would you want for the 2L and head

BoOStiN · rice boy Joined: 04 Dec 2003 Posts: 16

How much you asking for the head?

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

What do you think its worth and i will see if close to what i want for it.

Cheers
Matthew

wishv6wish · tinkerer Joined: 28 Dec 2003 Posts: 66

how about 200 for head 150 for bottem end

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

$200 for the head sounds alright. I also have a couple of other people interested in it as well, so I will have to check with them also. In the end, I guess it will go to the highest bidder.

I was looking for $300 for the G200 bottom end and lightened jackaroo flywheel and clutch (it is larger than the gemini clutch)

Matthew

macca_loto · tinkerer Joined: 30 Jul 2002 Posts: 168

Ill give ya $100 for the flywheel and the clutch.

CHRIS...

OTD 079 · tinkerer Joined: 23 Jan 2003 Posts: 78

i thought that it would be best to sell it together with the 2L block. If the motor doesn't soon, I will consider your offer.

I am not sure how much meat is on the clutch, and the flywheel has been sitting around for a while and will need machining.