View previous topic :: View next topic |
Author |
Message |
arnaout tinkerer
Joined: 06 Oct 2001 Posts: 90
|
Posted: Mon Nov 05, 2001 11:34 pm Post subject: ca18det conversion |
|
|
haloo vry1 i was jus wonderin if any1 knows bout these conversions as i am thinkin of undertaking one in the very near future. all help would b much apreciated. ps i have a tf gem |
|
Back to top |
|
|
Adam Site Admin
Joined: 04 Oct 2001 Posts: 682
|
Posted: Tue Nov 06, 2001 1:49 am Post subject: Re: ca18det conversion |
|
|
You'll need to change to a hydraulic clutch, you'll need custom engine mounts and custom gearbox mounts, a surge tank, a high pressure fuel pump, high pressure fuel lines, the nissan ECU or an aftermarket unit.... $1800 for a halfcut of a CA18DET... if someone wants to loan me $800 I'll start the workshop article tomorrow. |
|
Back to top |
|
|
arnaout tinkerer
Joined: 06 Oct 2001 Posts: 90
|
Posted: Tue Nov 06, 2001 7:58 pm Post subject: Re: ca18det conversion |
|
|
hav u alredy done the conversion? |
|
Back to top |
|
|
arnaout tinkerer
Joined: 06 Oct 2001 Posts: 90
|
Posted: Tue Nov 06, 2001 11:54 pm Post subject: Re: ca18det conversion |
|
|
also wouoldnt the stok ECU cum wit the front cut? |
|
Back to top |
|
|
Adam Site Admin
Joined: 04 Oct 2001 Posts: 682
|
Posted: Wed Nov 07, 2001 2:42 am Post subject: Re: ca18det conversion |
|
|
Haven't done the conversion yet or I'd have already done the workshop article.
The ECU will come with the halfcut, assuming you buy a halfcut and not just an engine and transmission. |
|
Back to top |
|
|
arnaout tinkerer
Joined: 06 Oct 2001 Posts: 90
|
Posted: Wed Nov 07, 2001 7:26 pm Post subject: Re: ca18det conversion |
|
|
are u planing on doin it? |
|
Back to top |
|
|
Adam Site Admin
Joined: 04 Oct 2001 Posts: 682
|
Posted: Thu Nov 08, 2001 3:17 pm Post subject: Re: ca18det conversion |
|
|
Yes, just need a bigger pile of folding stuff. |
|
Back to top |
|
|
|