| View previous topic :: View next topic |
| Author |
Message |
Shark
tinkerer
Joined: 03 Dec 2001
Posts: 226
|
 Posted: Sun Dec 09, 2001 7:05 pm Post subject: Door Removal |
 |
|
| I cannot figure out how to remove the doors on my TC Coupe. Can anyone help me out? |
|
| Back to top |
|
 |
TXcoupe
petrol head
Joined: 05 Oct 2001
Posts: 1675
|
| Posted: Sun Dec 09, 2001 7:37 pm Post subject: Re: Door Removal |
|
|
| use a angle grinder if you replacing the door and a centre punch on the pins should do it |
|
| Back to top |
|
|
Adam
Site Admin
Joined: 04 Oct 2001
Posts: 682
|
| Posted: Mon Dec 10, 2001 2:33 am Post subject: Re: Door Removal |
|
|
There is a tool made by ABW (??) available from autobarn/repco etc.
It is effectively a drift with a three different size pins to remove the split pin inside the hinge.
That said, even with the tool I can't get the door of gertrude so I am going to angle grind the f#@ker off. |
|
| Back to top |
|
|
TXcoupe
petrol head
Joined: 05 Oct 2001
Posts: 1675
|
| Posted: Mon Dec 10, 2001 4:56 am Post subject: Re: Door Removal |
|
|
| yeap go the angle grinder |
|
| Back to top |
|
|
Chase
rice boy
Joined: 28 Nov 2001
Posts: 13
|
| Posted: Mon Dec 10, 2001 3:02 pm Post subject: Re: Door Removal |
|
|
I have had some success using a long piece of solid alloy bar just the right size to fit inside and knock the pin out and long enough to be driven in with a hammer from above the door.
Hope this helps. |
|
| Back to top |
|
|
|
