View previous topic :: View next topic |
Author |
Message |
hotgem1 rice boy
Joined: 25 Feb 2002 Posts: 13
|
Posted: Fri Mar 01, 2002 12:23 am Post subject: 2L DOHC Aluminium Head Gasket |
|
|
Hey guys,
I have a custom made aluminium head gasket for a 2L Isuzu engine. Was originally made for my twin cam but the block is the same as the SOHC. Made to original gasket thickness.
Perfect for those of you with upped compression or better still buckets of boost!!! Has never been used.
$140 ono
Ok guys, i did some checking, the 2L DOHC head gasket is different to the 2L SOHC but is the same as the 1.8L DOHC with just a different bore size. The bore size on this particular gasket is 88mm.
In answer ot the other questions:
- I am in Melbourne
- The difference btw copper and aluminium? One is copper and one is aluminium? One is Cu and one is Al? The other thing i heard was that copper gaskets can in some instances promote electrolysis btw the cast block and the alloy head causing corrosion unless they are pulled down regularly... makes sense in theory but....?
- It would suit someone who has an o-ringed block especially
- I can organise to have it sent if you wanted to pay for it
Thanks
Mat
email me please so i don't have to keep replying here:
hotgem1@optushome.com.au |
|
Back to top |
|
|
DOHC rice boy
Joined: 03 Feb 2002 Posts: 49
|
Posted: Fri Mar 01, 2002 5:14 pm Post subject: Re: 2L DOHC Aluminium Head Gasket |
|
|
I'm interested, but I can't get your email address to work... Is that definately correct?
Email me at ross.smith@eds.com if your still looking to sell it.
Cheers, |
|
Back to top |
|
|
hotgem1 rice boy
Joined: 25 Feb 2002 Posts: 13
|
Posted: Tue Mar 05, 2002 6:57 pm Post subject: Re: 2L DOHC Aluminium Head Gasket |
|
|
Sorry guys, had the wrong email address on there, it is:
hotgem@optushome.com.au
Thanks |
|
Back to top |
|
|
|