View previous topic :: View next topic |
Author |
Message |
PinkBitz petrol head
Joined: 13 Apr 2002 Posts: 1594
|
Posted: Sat Apr 13, 2002 6:51 pm Post subject: Ignition Leads |
|
|
I recently pulled all my igition leads out of my tf gemini, to put new ones in. Now I have new leads, i have no idea on which lead goes to which spark plug etc. I dont know where they go? Cane someone please help me????
thanx |
|
Back to top |
|
|
Adam Site Admin
Joined: 04 Oct 2001 Posts: 682
|
Posted: Sat Apr 13, 2002 7:03 pm Post subject: Re: Ignition Leads |
|
|
yep, pull the number one spark plug out and roll the engine over until it is at top dead centre (look at the crank notch) and you can feel positive pressure in the cylinder. Remove the dizzy cap and note the direction the dizzy rotor is pointing, put the #1 spark plug lead on there, then you can just work it from the firing order (1,3,4,2) |
|
Back to top |
|
|
PinkBitz petrol head
Joined: 13 Apr 2002 Posts: 1594
|
Posted: Sat Apr 13, 2002 7:11 pm Post subject: Re: Ignition Leads |
|
|
whats the crank notch |
|
Back to top |
|
|
Adam Site Admin
Joined: 04 Oct 2001 Posts: 682
|
Posted: Sat Apr 13, 2002 11:40 pm Post subject: Re: Ignition Leads |
|
|
On the crankshaft pulley, there is a notch which marks top dead centre relative to the timing marks... |
|
Back to top |
|
|
Racegem backyard mechanic
Joined: 30 Jan 2002 Posts: 987
|
Posted: Sun Apr 14, 2002 12:04 am Post subject: Re: Ignition Leads |
|
|
And the dissy spins anti-clockwise.
Yonnee. |
|
Back to top |
|
|
PinkBitz petrol head
Joined: 13 Apr 2002 Posts: 1594
|
Posted: Sun Apr 14, 2002 1:22 am Post subject: Re: Ignition Leads |
|
|
so is there any particular order |
|
Back to top |
|
|
Kizza tinkerer
Joined: 06 Oct 2001 Posts: 440
|
Posted: Sun Apr 14, 2002 10:08 pm Post subject: Re: Ignition Leads |
|
|
i did that on the tractor at work when i was cleaning the plugs, you just put them on in any order then see if it will start, it might start and sound real rough so you use plastic pliers to pull a lead of the plug 1 at a time and if theres a noise change that lead is on the wrong plug.
hope it helps, if ya can understand it
kizza |
|
Back to top |
|
|
rob_w tinkerer
Joined: 19 Feb 2002 Posts: 395
|
Posted: Mon Apr 15, 2002 11:09 am Post subject: Re: Ignition Leads |
|
|
pay attention....1,3,4,2. you have been told this already.
if it dosent work/ backfires, reverse the order, so that 1 is 4 ect. |
|
Back to top |
|
|
|