View previous topic :: View next topic |
Author |
Message |
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Thu May 02, 2002 9:04 pm Post subject: Racegem |
|
|
hey racegem can i get a price for 1800 + 0.030 pistons in acl flatops if possible and with rings
plz
cheers |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Thu May 02, 2002 9:36 pm Post subject: Re: Racegem |
|
|
$189 or $198 cant member one of the 2, gaz just told me |
|
Back to top |
|
|
Momo backyard mechanic
Joined: 08 Feb 2002 Posts: 561
|
Posted: Thu May 02, 2002 10:41 pm Post subject: Re: Racegem |
|
|
Is that for the lot - pistons and rings Josh? |
|
Back to top |
|
|
Pervert backyard mechanic
Joined: 09 Mar 2002 Posts: 527
|
Posted: Fri May 03, 2002 12:32 am Post subject: Re: Racegem |
|
|
THATS all for 4 pistons and rings?? damn thought it would be more expensive then that. |
|
Back to top |
|
|
Racegem backyard mechanic
Joined: 30 Jan 2002 Posts: 987
|
Posted: Fri May 03, 2002 12:41 am Post subject: Re: Racegem |
|
|
Yeah, allow about $50 - $60 per pot for good quality hypereutectic slugs and moly rings.
See what I can confirm tomorrow.
Yonnee. |
|
Back to top |
|
|
Momo backyard mechanic
Joined: 08 Feb 2002 Posts: 561
|
Posted: Fri May 03, 2002 1:04 am Post subject: Re: Racegem |
|
|
Hey Yonnee, can you get me a price on whatever I'd need to build a strong bottom end for that CDT head + garrett turbo I was talking about the other day. I've got an old 1600 that I wouldn't mind building to run reasonable boost but I don't want to be rebuilding it every 4 months. |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Fri May 03, 2002 11:32 am Post subject: Re: Racegem |
|
|
MomoFan,
I have used a G161 bttom end, Bore the shit out of it, put some VL Slugs in it (good for low comp), and mod the rod's so your have full floaters, balanced the lot, o'rings, and copper head gasket, one tuff bottom end,
cheers,
Eggy |
|
Back to top |
|
|
Momo backyard mechanic
Joined: 08 Feb 2002 Posts: 561
|
Posted: Fri May 03, 2002 11:39 am Post subject: Re: Racegem |
|
|
Excellent - that's exactly the advice and info I need....to tell my mechanic! hahaha
thanks
Eggy. |
|
Back to top |
|
|
GasGem backyard mechanic
Joined: 05 Nov 2001 Posts: 755
|
Posted: Fri May 03, 2002 11:49 am Post subject: Re: Racegem |
|
|
yeah you need to have your rod's honed just a little so the VL pins fit, so they float like they should,
I can safely run up to 18 PSI on this setup not a problem,
Cheers
Eggy |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Fri May 03, 2002 6:00 pm Post subject: Re: Racegem |
|
|
yes that was a whole sale price for both rings and pistons (ACL) |
|
Back to top |
|
|
|