|
View previous topic :: View next topic |
Author |
Message |
Birko tinkerer
Joined: 03 Apr 2002 Posts: 180
|
Posted: Tue Jun 25, 2002 1:33 am Post subject: Hey GEM12c |
|
|
Hey,
i read your post in the 'whats your project' and you said you were running LPG.
I to am thinking of this in my TG and am probaly going for a 350 gas reseach carby on a efi (rodeo or piazza)manifold.
What system are you running?
What engine work has been done, estimated hp etc??
Im looking for about 140-150 hp (flywheel) with a worked 2ltr and gas cam, in my biuld
any info appreciated..
cheers |
|
Back to top |
|
|
gem12c tinkerer
Joined: 27 Mar 2002 Posts: 53
|
Posted: Tue Jun 25, 2002 1:11 pm Post subject: Re: Hey GEM12c |
|
|
gas system:it's a series 2000, inlet and outlet at 90 deg and a flow rate of 296 cfm.
manifold is custom but very similar to the piazza, just longer runners for bottom end torque. i used a vn comm air fillter box and placed it where the battery was, and the battery sit's on the oppisite side.
engine work: stock bottom end, head has been ported to match the manifold and head shaved to get 10.5:1 compression. cam is a crow cam 30/58 power range from 1800 to 5500 rpm.
kw is about 93 according to the installer, but i want to put it on a dyno to confirm that.
i designed the engine so it is not a high rev motor.
i hope i have helped and good luck. |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
|
|