View previous topic :: View next topic |
Author |
Message |
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Sun Aug 11, 2002 8:44 pm Post subject: salisbury and Borg Warner Diffs |
|
|
Does anyone know if a salisbury diff centre can be used in a Borg Warnder housing?
I haven't had a chance to check out a Borg warner diff, so I cannot compare as yet.
Thanks. |
|
Back to top |
|
|
alan tinkerer
Joined: 07 Apr 2002 Posts: 429
|
Posted: Mon Aug 12, 2002 3:07 pm Post subject: Re: salisbury and Borg Warner Diffs |
|
|
Cant give you a yes no answer.
Ive tried it,and the shims wont fit, so I didnt go any further. You'll have to get thicker/thinner ones.
Apart from that, I've seen about 3 different axle patterns come out of gems, I would check to make sure they will slide into the center first.
Remember you have to change the pinion and crown wheels as a set too. |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Wed Aug 14, 2002 1:22 am Post subject: Re: salisbury and Borg Warner Diffs |
|
|
Well I was considering putting the borgwarner crown gear onto the salisbury centre, and then bolting the lot into the borg warner housing. Thanks anyway. |
|
Back to top |
|
|
|