View previous topic :: View next topic |
Author |
Message |
rob_w tinkerer
Joined: 19 Feb 2002 Posts: 395
|
Posted: Tue Jul 01, 2003 4:26 pm Post subject: 2" too small? |
|
|
hi all,
just after some opinions....
im runing a high-comp 2ltr with a single 38dgms, and a 'medium street' crow cam. i have a set of 4-2-1 extractors that lead to a 2" exhaust. the trouble is, when it get to around 3500 rpm, right in the middle of the torque curve, it doesnt make any more power. the cam [on paper] stops making power at 6500rpm, and the carby+ports are huge, so that leaves me with one option..the exhaust is too small.
i could go and get a 2.5" fitted, but the extractors i have end in a 2" outlet. the extractors were originally fitted to the g200, but im concerned that having a 2" outlet leading to a 2.5" pipe would be a waste of time, due to the restriction at the end of the extractors.
what do you guys think??
thanks,
rob. |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Tue Jul 01, 2003 4:32 pm Post subject: Re: 2" too small? |
|
|
go 4-1 tuned extractors and a 2.5 system
i had what u have now and went to that ^^(above) and was NEAP noticable in diefference _________________
|
|
Back to top |
|
|
rob_w tinkerer
Joined: 19 Feb 2002 Posts: 395
|
Posted: Tue Jul 01, 2003 4:35 pm Post subject: Re: 2" too small? |
|
|
NEAP???? wtf??
ok, 4-1 to a 2.5"
ill look into it.
thanks,
rob. |
|
Back to top |
|
|
Adam Site Admin
Joined: 04 Oct 2001 Posts: 682
|
Posted: Tue Jul 01, 2003 5:14 pm Post subject: Re: 2" too small? |
|
|
I'd be looking at jetting and the ignition advance curve first, make sure everything else is sorted. |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Tue Jul 01, 2003 5:38 pm Post subject: Re: 2" too small? |
|
|
u obviously dont understand gene-lish
i mean HEAPS _________________
|
|
Back to top |
|
|
|