View previous topic :: View next topic |
Author |
Message |
GEMTEC tinkerer
Joined: 02 Aug 2003 Posts: 216
|
Posted: Fri Aug 08, 2003 12:11 am Post subject: DISK BRAKE CONVERSION - FRONTS |
|
|
Hey. i was just wondering what would be a good front brake conversion. you see, i just went and bought a set of 17's for my TF. there isnt much to the wheel and so it seems, it is showing off my pissy ass 11-12 rotors on the front. its patheic. so if someone knows a way of upgrading to larger rotors and calipers keeping in mind a budget, it would be greatly appreciated if you could help me out.
THANX |
|
Back to top |
|
|
Pete backyard mechanic
Joined: 05 Oct 2001 Posts: 502
|
Posted: Fri Aug 08, 2003 12:44 am Post subject: Re: DISK BRAKE CONVERSION - FRONTS |
|
|
the rod shop in (vic?) somewhere south of the NSW boarder does a volvo kit/ all 4, not just front which is a good thing because drums are gay. bout a grand and they will COD it anywhere in australia. its a bolt on thing.
as u know volvo's are renound for their stopping power. the 244 etc are where i would imagine they get the discs and calipers from have a 2.4l engine and weigh like 2+ tonnes! and the breaks pull up awesome... so on a gem itl rip.
other choice is vl turbo front vs/r/t rear.
and i have heard the sigma is an ok swap...
obviously u will need a workshop or extensive knowledge... plus an engineers cert afterwards. |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
|
Back to top |
|
|
Loz backyard mechanic
Joined: 05 Oct 2001 Posts: 943
|
|
Back to top |
|
|
hot1800 tinkerer
Joined: 15 Mar 2003 Posts: 59
|
Posted: Fri Aug 08, 2003 7:42 pm Post subject: Re: DISK BRAKE CONVERSION - FRONTS |
|
|
they look like 4 spots from a volvo
what bm has 4 piston calipers |
|
Back to top |
|
|
overit tinkerer
Joined: 30 May 2003 Posts: 317
|
Posted: Fri Aug 08, 2003 9:07 pm Post subject: Re: DISK BRAKE CONVERSION - FRONTS |
|
|
specialised brake and clutch 330mm drilled and slotted rotas 4 spot ap calipers complete bolt up to gemini stud pattern around the 850-950 mark smallest rim u can fit is 17in there in st marys nsw |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Fri Aug 08, 2003 10:19 pm Post subject: Re: DISK BRAKE CONVERSION - FRONTS |
|
|
bmw series 7 |
|
Back to top |
|
|
Loz backyard mechanic
Joined: 05 Oct 2001 Posts: 943
|
Posted: Sun Aug 10, 2003 3:20 am Post subject: Re: DISK BRAKE CONVERSION - FRONTS |
|
|
Yay someone reads... |
|
Back to top |
|
|
|