View previous topic :: View next topic |
Author |
Message |
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Mon Aug 11, 2003 9:58 pm Post subject: weber on ford 4L??? |
|
|
I got another 32/36 weber on saturday for $20 because the 180 holley i have atm is fucked, all flogged out and stuff. My question is... How big are the barrals on the weber that is off the ford 250X flows??? cheers |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Mon Aug 11, 2003 10:58 pm Post subject: Re: WEBER off ford 4L??? |
|
|
hrmm |
|
Back to top |
|
|
Winterheart tinkerer
Joined: 04 Dec 2002 Posts: 144
|
Posted: Tue Aug 12, 2003 3:43 am Post subject: Re: WEBER off ford 4L??? |
|
|
I thought the Weber 32\36 had 32mm primary throat, and 36mm secondary throat, as compared to the Nikki which had 28mm primary and 32mm secondary.
If I'm wrong, could someone please correct me.
Cheers |
|
Back to top |
|
|
Winterheart tinkerer
Joined: 04 Dec 2002 Posts: 144
|
Posted: Tue Aug 12, 2003 3:49 am Post subject: Re: WEBER off ford 4L??? |
|
|
And I can't read for crap at almost 2am in the morning, so I'll try and answer your question a second time. From my rather shaky 2am memory, the 250 Crossflow Falcons came with a 38mm Weber on them.
Again, if I'm wrong, could someone please correct me.
Cheers |
|
Back to top |
|
|
TGemi1 tinkerer
Joined: 23 Mar 2003 Posts: 456
|
Posted: Tue Aug 12, 2003 12:12 pm Post subject: Re: WEBER off ford 4L??? |
|
|
they are actually a 34adm weber, form the 250xflow engines, can use same adapter as 32/36 to mount to gemi manifold, but u wil have to re-jet the carb as it runs too rich, once tuned right i hear they go well.
chris... |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Wed Aug 13, 2003 11:36 pm Post subject: Re: WEBER off ford 4L??? |
|
|
so both barrals and 34mm??? |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Thu Aug 14, 2003 1:00 am Post subject: Re: WEBER off ford 4L??? |
|
|
The 32/36 has 32 and 36mm butterflies, 27 and 28mm chokes.
The 34 ADM has a pair of 34mm butterflies, and 28 and 29mm chokes. (i might be out a mm here, I cant remember for sure.)
The chokes have the main influence on the airflow with these carbs, so the ADM will flow more air due to the larger cross sectional area of the chokes. Hence, they are factory fitment on 4.1 litre engines, as compared to 2 litre engines as the 32/36 is fitted to.
Ben |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Thu Aug 14, 2003 11:09 pm Post subject: Re: WEBER off ford 4L??? |
|
|
what does adm stand for? |
|
Back to top |
|
|
|