View previous topic :: View next topic |
Author |
Message |
Tweakin TE rice boy
Joined: 15 Aug 2003 Posts: 22
|
Posted: Fri Aug 29, 2003 9:31 am Post subject: amp wiring probs |
|
|
hey guys, i put my 2 12's in a few weeks ago to my boss amp. i hooked one up unbridged, it sounded pretty good, then the other and the sound volume decreased dramatically. so i bridged one properly *positive to positive, negative to negative* then the other in reverse on the same channel *positive to negative terminal and negative to positive terminal. so there are two spreakers running on one bridge. will this hurt either the amp or my speakers?
i bought some rca splitters yesterday caus myhead unit only has one rca out. i put one on the rear channel, then one on the front, kept the rear one bridged, and took the other of the rear, put it on the front and bridged that. the front one has alot of high frequencys, like trebles, and it makes it sound a bit how you goin. on the back of the amp it has a switch for full frequency and HPF. i changed it over to HPF, wound it all the way up to kill as much as possible, but it still sounds a bit shitty, any ideas?
sorry about the long post
Andrew |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
Posted: Fri Aug 29, 2003 10:28 am Post subject: Re: amp wiring probs |
|
|
For subs you want LPF not HPF
High Pass Frequency only lets high frequencies through which is the opposite of what you want for subs.
I don't know exactly why you've done what you have when it comes to briding your speakers. Is it a 2 channel or a 4 channel amp?
If it's only a 2 channel amp then you can only run 1 channel bridged, if it's a 4 channel amp then you can run 2 channels bridged.
What you have done there sounds wrong to me. |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Fri Aug 29, 2003 10:58 am Post subject: Re: amp wiring probs |
|
|
if its the amp im thinking of?? chrome with the fann in the middle? 4x250watt???
only 2 of the channels are ment for subs the other 2 for componant speakers. from membery it says that on the side? but read the manual and it will tell u that.
if its no that amp. then bridge it to 2x500. + on + and - on -, NOT - on + at anytime.... u could always
if it is the amp im thinking of, try runing the 2 in parallel off the bridged 2 "sub channel" this is by runing from the - of the 2 bridges, to - of one sub then the + of that sub to the - of the other sub then the + of that sub to the + on the briged terminal
(give me a few minutes and i will draw a diagram) _________________
![](http://img300.imageshack.us/img300/1737/sig3dx5.jpg) |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Fri Aug 29, 2003 11:03 am Post subject: Re: amp wiring probs |
|
|
woops, i mean "continus" not parallel _________________
![](http://img300.imageshack.us/img300/1737/sig3dx5.jpg) |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Fri Aug 29, 2003 12:10 pm Post subject: Re: amp wiring probs |
|
|
yeah make sure u run the right resistanc, for the subs usually 2, 4 or 6
the amps should be on the box or manual _________________
![](http://img300.imageshack.us/img300/1737/sig3dx5.jpg) |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
NeWaZ tinkerer
Joined: 08 Feb 2002 Posts: 161
|
Posted: Fri Aug 29, 2003 12:11 pm Post subject: Re: amp wiring probs |
|
|
yeh as Frederick said, what is the nominal resistance of the subs you are using... if they are 4ohms running them parallel you will be giving the amp a 2ohm load, which some amps cannot take, but running them in series is not efficient, as the power given to the subs is greatly reduced
if your amp has two channels free for subs why not just wire one sub to each channel.. it's not the most optimal but might be your best and safest bet
Cheers
NeWaZ
ps. give us some specs on your equipment so we can help more |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Fri Aug 29, 2003 12:17 pm Post subject: Re: amp wiring probs |
|
|
"if your amp has two channels free for subs why not just wire one sub to each channel.. it's not the most optimal but might be your best and safest bet "
lol yeah.. thats the imple solution!! (slipped my mind)
but if the ohms on the amp is different to the ones on the subs then play with the other ways.
also quick quuestion
if u have a 4 ohm amp and 2x 4 ohm subs in parllel, is that still a 4 ohm load or 8?? _________________
![](http://img300.imageshack.us/img300/1737/sig3dx5.jpg) |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
Posted: Fri Aug 29, 2003 12:47 pm Post subject: Re: amp wiring probs |
|
|
2 x 4ohm subs in parallel is a 2ohm load
2 x 4ohm subs in series is a 8ohm load |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
NeWaZ tinkerer
Joined: 08 Feb 2002 Posts: 161
|
Posted: Fri Aug 29, 2003 2:56 pm Post subject: Re: amp wiring probs |
|
|
yep and an amp doesn't really have an nominal resistance but unless stated otherwise most will not run stable when recieving less than a 4ohm load (ie. 2ohm, 1.5 ohm etc)
ideally an amp that is not 2ohm stable running two channels bridged with 2 subs wired in parallel, you should use two 8 ohm subs to give the amp a 4 ohm load and still get the most power possibe from the bridged channels
hope this helps ppl
ta
NeWaZ |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Fri Aug 29, 2003 3:09 pm Post subject: Re: amp wiring probs |
|
|
if he cant simply wire the 2 subs to the amp i think all this jibberish will go straght over his head hehe _________________
![](http://img300.imageshack.us/img300/1737/sig3dx5.jpg) |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Tweakin TE rice boy
Joined: 15 Aug 2003 Posts: 22
|
Posted: Fri Aug 29, 2003 6:08 pm Post subject: Re: amp wiring probs |
|
|
hi guys, thanks for your help
i get it all gene lol, i just never done this amp shit before. the speakers are rated at 4ohm, 800watt, and the amp your thinking of is the one i got, a sack of shit. if i was to wire each sub to each sub channel, i'd have to crank the amp, and still it's not loud enough. the way i've got it *think of it this way, i'll start at the + terminal of the bridge* it goes + terminal of bridge, to + of one sub, then the - of the bridge terminal to the - of the sub. the other sub has + to -, then - to +. so i've got one sub bridged properly, then the other on the same bridge with the polarity reversed. i have two wires on each post.
so specs are 2x12" poweracoustiks 4ohm 800watt subs run of 1 boss audio 4X250watt amp with ratings of 4 - 12 ohms. so if i wired it in series to make the resistance 8ohms, this'll be fine. someone said if i do it this way it's not really efficient? is it better than one sub of each channel? |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Fri Aug 29, 2003 8:29 pm Post subject: Re: amp wiring probs |
|
|
on sub on each channel will work best. u wii get stereo sound also instead of mono _________________
![](http://img300.imageshack.us/img300/1737/sig3dx5.jpg) |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
NeWaZ tinkerer
Joined: 08 Feb 2002 Posts: 161
|
Posted: Sat Aug 30, 2003 1:12 pm Post subject: Re: amp wiring probs |
|
|
yeh the way you have it is in series which is fine, but as i said isn't getting the most out of your subs and amp
as gene said you are probably better off running one sub off each sub channel
i've run into the same prob running two 12's off a Re/Sponse 2*150 amp.. the subs are 4ohm but only rated at 150rms so i run them each off a channel of the amp and theoretically they are getting their rated 150wrms and they sound great
just try the different set ups we have told you and use which ever sounds best.. it is you that will be listening to it!!!
NeWaZ |
|
Back to top |
|
![](templates/HotGemini/images/spacer.gif) |
|