View previous topic :: View next topic |
Author |
Message |
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Fri Aug 29, 2003 7:21 pm Post subject: ATT ben about 34ADM |
|
|
Hey I got that part I needed for the 34 ADM today. It's fucking weird looking. It has a 70 Jet in it but it is vacum controlled. Do you know where I am suppose to hook the vacun up to? My guess was maybe it's for the air con during idle to bump the idle up? any ideas? Also my 34ADM isnt the one with all the electronic shit on it but when i was at the wreckers I seen a XE with the same carby as I got except it had wires and shit hanging off it. Do you know what other functions can be put on the weber?
cheers dood |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Fri Aug 29, 2003 11:04 pm Post subject: Re: ATT ben about 34ADM |
|
|
You got the right part, I assume it is to be hooked up to manifold vacuum, it says in the Falcon gregorys manual what its for, but I cant remember exactly. Its not for idle, idle is controlled by a completely different circuit.
That jet is the secondary progression jet, it comes into play when you have you foot about 50% to the floor already and the secondary butterfly is starting to open, which is usually a fair way from idle.
Ben |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Sat Aug 30, 2003 9:05 pm Post subject: Re: ATT ben about 34ADM |
|
|
it's on the primary side of the carby, You know anything about all that electric stuff i seen on the other 34 ADM i seen? |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Sun Aug 31, 2003 1:26 am Post subject: Re: ATT ben about 34ADM |
|
|
Sorry, if its on the primary side, then it would be an idle jet. I thought it was sec, I haven't played with those carbs for a while.
I think there is a solenoid that controls fuel flow to the return line, it gets blocked off at full throttle, giving the fuel bowl 100% of fuel supply.
there is also another solenoid, It might be an anti-dieseling solenoid, I cant remember.
Why do you want all the electrical stuff, not happy with your current carb?
Ben |
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Sun Aug 31, 2003 4:49 pm Post subject: Re: ATT ben about 34ADM |
|
|
Na i'm happy, Just wanted to know what it did, cheers dood |
|
Back to top |
|
|
|