View previous topic :: View next topic |
Author |
Message |
FLYINLoW backyard mechanic
Joined: 08 Oct 2001 Posts: 924
|
Posted: Mon Sep 08, 2003 8:47 pm Post subject: GEM4PLAY |
|
|
hey are u running standard dizzy on your twincam ??
and how many coils ???
how much boost is your engine holding up too ? |
|
Back to top |
|
|
GEM4PLAY tinkerer
Joined: 10 Feb 2003 Posts: 252
|
Posted: Tue Sep 09, 2003 2:17 pm Post subject: Re: GEM4PLAY |
|
|
Q1.Custom Dissy built by 'Performance Ignition Services' in Melbourne.
Q2.Single coil supplied by the above.
Q3.the hole time the car was going the plenium was cracked and cracking more everytime you drove the car. That should be fixed today then back on the dyno for about 15-18psi. |
|
Back to top |
|
|
FLYINLoW backyard mechanic
Joined: 08 Oct 2001 Posts: 924
|
Posted: Tue Sep 09, 2003 3:59 pm Post subject: Re: GEM4PLAY |
|
|
you getting whole new plenium ?
so your obviously not running a crank angle sensor etc etc
and your running a t04 yes ? whens boost come on ?
is your turbo still heating up really bad ? |
|
Back to top |
|
|
GEM4PLAY tinkerer
Joined: 10 Feb 2003 Posts: 252
|
Posted: Wed Sep 10, 2003 4:09 pm Post subject: Re: GEM4PLAY |
|
|
old plenium is being re-welded and yes it's a t04.
i don't know when boost comes on properly because we suspect that the plenium has been cracked for 99% of the time that the cars been going. and thats why the turbo was heating up so bad aswell, we think. |
|
Back to top |
|
|
|