| View previous topic :: View next topic |
| Author |
Message |
TurboTG
rice boy
Joined: 09 Sep 2003
Posts: 12
|
 Posted: Fri Sep 12, 2003 11:22 pm Post subject: Carbys |
 |
|
Just wondering is it true that a carby off a xd or xf or xe
bolts straight onto a 1600 were the old carby was?
and if not what has to be modified?
sorry about the post
Mike |
|
| Back to top |
|
 |
Smokey
rice boy
Joined: 24 Jun 2002
Posts: 38
|
| Posted: Sat Sep 13, 2003 1:15 am Post subject: Re: Carbys |
|
|
| yes you should be sorry bout the post, there is a search function up the top of this forum, it's purpose is so that dickheads like you don't keep asking the same questions |
|
| Back to top |
|
|
TurboTG
rice boy
Joined: 09 Sep 2003
Posts: 12
|
| Posted: Sat Sep 13, 2003 1:20 am Post subject: Re: Carbys |
|
|
| well im new and i did not no wanker grow up moron |
|
| Back to top |
|
|
Smokey
rice boy
Joined: 24 Jun 2002
Posts: 38
|
| Posted: Sat Sep 13, 2003 1:39 am Post subject: Re: Carbys |
|
|
i'm pretty sure the xf falcon came out with a 34 adm weber (someone correct me if i'm wrong and if you can be bothered), not sure bout the other models but i'm assuming they have pretty much the same carby. Yes this carby will bolt onto your 1600, but no this isn't a straight bolt on. you will need to purchase an adaptor plate, and then it will bolt straight on. you may have to stuff around with the accelerator cable bracket. this carby seems like it might be a bit big for your 1600, most people lean towards the 32/36 weber for the 1600 and 34 adm for the 1800, also have you modified your engine in any other way? if not i would look into things like, extractors, exhaust and cam. get the weber last, as to get the thing to run properly (and efficiently) you will need to get it dynoed.
hope this helps
cheers wanker/moron |
|
| Back to top |
|
|
Sik_Gemi
rice boy
Joined: 02 Oct 2002
Posts: 39
|
|
| Back to top |
|
|
|
