View previous topic :: View next topic |
Author |
Message |
ONLYA4 petrol head
Joined: 12 May 2003 Posts: 1114
|
Posted: Thu Oct 30, 2003 1:09 am Post subject: Nikki Carby Help |
|
|
www.ausgenerals.com/phakt/carbypic.jpg
Ok, that is my attempt to draw the carby.
If you understand my drawing, well then can you explain what i have done wrong, the plastic part of the cable casing that has the thread on it, gets in the way of the half circle and the half circle thing can't move when you push the accelerator down so i can't get any revs.
If that makes ANY sence to anyone, please tell me how to fix it, thanks a lot. |
|
Back to top |
|
|
Kizza tinkerer
Joined: 06 Oct 2001 Posts: 440
|
Posted: Thu Oct 30, 2003 2:17 am Post subject: Re: Nikki Carby Help |
|
|
three things,
1. accelerator bracket could be upside down, so if u flip it up the other way it might work.
2. bracket might be bent so loosen the cable nut and bend the bracket back up a bit to get some clearance
3. cable might be wrong sort, u could adapt it by cutting a few threads of so it clears the lever thingy. |
|
Back to top |
|
|
Tex tinkerer
Joined: 13 Feb 2003 Posts: 163
|
Posted: Wed Nov 05, 2003 12:19 am Post subject: Re: Nikki Carby Help |
|
|
I thought the nut went on the other side of the metal thing that holds the cable, could be worng though. Its been a while since I took off the cable |
|
Back to top |
|
|
|