TWIN CAMS

gem · tinkerer Joined: 23 Dec 2001 Posts: 152

I have lots of twin cam parts and 3 engines for sale 2x 1.8lt and 1x 2.0lt twin cam race engine.
Can C.O.D most parts

mystikal21 · tinkerer Joined: 23 Jul 2003 Posts: 160

intrested in the 1.8 motor im in melbourne willing to pick up if they are in resonalble condition and if it is a fair price

mystikal21 · tinkerer Joined: 23 Jul 2003 Posts: 160

intrested in the 1.8 motor im in melbourne willing to pick up if they are in resonalble condition and if it is a fair price email me at epikouli@bigpond.net.au

gem · tinkerer Joined: 23 Dec 2001 Posts: 152

Both engines are in good nik.E-mail me at gem@alphalink.com.au and we can talk on the phone. I am in Sydenham.

FLYINLoW · backyard mechanic Joined: 08 Oct 2001 Posts: 924

hey im in desperate need of a part for my twincam
the engine builders returned the engine minus a part and now i cant put it back together unless i find one.

the part i need is the cam chain drive sprocket that attaches to the crank at the bottom, i believe its held on the crank with a key. if you have a spare one u r willing to ship me it would be my lucky day.
also if you have a sump and the 2 brackets that connect to the block that support the sandwich plate where the gearbox bolts up could you let me know asap

thanks

HOTHOUSE GREEN GEMI · tinkerer Joined: 19 May 2003 Posts: 148

Sydenham. in sydney?

gem · tinkerer Joined: 23 Dec 2001 Posts: 152

No. Victoria.

gem · tinkerer Joined: 23 Dec 2001 Posts: 152

Yes it is your lucky day. I have the sprocket you need. I also have a sump,as for the two brackets I will need to check but I don't think so.You can e-mail me at gem@alphalink.com.au and we can talk on the phone.If you want to see a picture of the sprocket I can send it to you.
Just remember I have plenty of parts-head,big cams,blocks,timing covers ,water pumps,oil pumps etc.
gem.

dunger · backyard mechanic Joined: 16 Oct 2002 Posts: 553

hey mate how much do you want for a 2L with a 5 speed, are these engines running, if so i will be very interested

BlueTC · petrol head Joined: 22 Oct 2002 Posts: 1148

I fat Chix,

i got a EFI DOHC with 5 speed, and many assorted parts to suit

and im in QLD, not quite up north, in Brisbane

needs a puter to run,

FLYINLoW · backyard mechanic Joined: 08 Oct 2001 Posts: 924

blue tc how much u asking ???

BlueTC · petrol head Joined: 22 Oct 2002 Posts: 1148

like i said a while ago,

make an offer.

EFI 2L DOHC with 5 speed
starter to suit,
Bosch HP/LV Fuel Pump and Prime pump, swirly pot,
Radiator to suit,
2 3/4 inch exhaust, no headers(extractors),

all it needs is a fuel computer and a lil clean up

gem · tinkerer Joined: 23 Dec 2001 Posts: 152

The 2.0lt race engine is currently in pieces as I am rebulding it. At least people can see what is inside it if they wanted to buy it. I am asking about $4000 for the engine and 5 speed. I know this is alot but this is not a normal twin cam. It has forged pistons,a lot of work done to the block and crank, custom cams ,stainless steel valves and a lot of head work to fit the big cams ,quad throttle bodies. The engine makes 200hp at the flywheel.
gem.

Gemini Driving Yobbo · petrol head Joined: 26 Feb 2002 Posts: 3897

or blue tc will sell it without the efi manifold if u want it cheaper

FLYINLoW · backyard mechanic Joined: 08 Oct 2001 Posts: 924

gem
did you get my email ???????
let me know