View previous topic :: View next topic |
Author |
Message |
NOPSI rice boy
Joined: 28 Oct 2003 Posts: 46
|
Posted: Tue Dec 16, 2003 9:44 pm Post subject: cam advice needed |
|
|
hi, here are my cars specs (engine)
g180
balanced and blue printed bottum end.
ported and polished head
flat top pistons
stage two cam
4 into 1 pacemaker extractors
2 & 1/4 exhaust system
not sure about the carby. Its a stock nikki but i have the feeling it has modified.
Anyway, i really want to upgrade my cam. Would this help or hinder its performance? what sort of gain or loss would i get from doing so? im thinking a stage 4 crow cam?
I did originally want to do a suckthrough carby supercharged setup but it wont be to leagal so i have threw out that idea.
Thanks for your advice in advance. |
|
Back to top |
|
|
DrIFtA tinkerer
Joined: 13 Mar 2003 Posts: 246
|
Posted: Tue Dec 16, 2003 10:45 pm Post subject: Re: cam advice needed |
|
|
Anything much bigger than a 30/70 and you really should upgrade the carby, esp if you give the tacho a floggin. See if u can find out more bout the carb like if it definately has been modded and wat was done 2 it.
do u drive da gemi hard enuf 2 take full advantage of that size cam u want ? |
|
Back to top |
|
|
NOPSI rice boy
Joined: 28 Oct 2003 Posts: 46
|
Posted: Tue Dec 16, 2003 10:58 pm Post subject: Re: cam advice needed |
|
|
i drive it like i stole it.
would a single webber do? I dont really like the idea of a mechanical secondary like on a webber but... |
|
Back to top |
|
|
NOPSI rice boy
Joined: 28 Oct 2003 Posts: 46
|
|
Back to top |
|
|
Josh backyard mechanic
Joined: 04 Oct 2001 Posts: 602
|
Posted: Tue Dec 16, 2003 11:36 pm Post subject: Re: cam advice needed |
|
|
Thats the cam I have, bought it about 4 weeks ago but i havnt installed it yet man so I cant tell ya much about it. I got the timing chain set as well... All up I paid $330 inc gst so dont pay anymore than that. I did the run around to get that price |
|
Back to top |
|
|
BLO20L rice boy
Joined: 19 May 2003 Posts: 16
|
Posted: Wed Dec 17, 2003 5:42 pm Post subject: Re: cam advice needed |
|
|
just supecharge it and EFI very easy and goes hard |
|
Back to top |
|
|
|