View previous topic :: View next topic |
Author |
Message |
PlasticAge rice boy
Joined: 07 Oct 2001 Posts: 29
|
Posted: Sun Oct 07, 2001 11:40 pm Post subject: Tx side window catch |
|
|
Does anyone know how to remove the side window lever (catch) without breaking the plastic. In most cases the plastic is so brittle that when u try to push the pin thro it will crack the plastic...shocking design, hehe i might add.
And how does one remove the window winders of the front doors?
And where abouts is the tempreture switch on the motor?..is it on the head or on the top of the radiator...
Kind Regards
PlasticAge |
|
Back to top |
|
|
MatMan tinkerer
Joined: 04 Oct 2001 Posts: 280
|
Posted: Sun Oct 07, 2001 11:46 pm Post subject: Re: Tx side window catch |
|
|
To get the winders off, you need to push the door trim back and squeeze a flat head screwdriver between the trim and winder, then try and flick to clip off. Bit of a bitch in practice. |
|
Back to top |
|
|
Woz tinkerer
Joined: 05 Oct 2001 Posts: 126
|
Posted: Mon Oct 08, 2001 9:08 pm Post subject: Re: Tx side window catch |
|
|
temp. switch or temp sensor??
the sensors located on the underside of the inlet manifold directly under the thermostat housing (between front two cylenders). |
|
Back to top |
|
|
|