View previous topic :: View next topic |
Author |
Message |
elky petrol head
Joined: 06 Oct 2001 Posts: 1149
|
Posted: Sun Oct 21, 2001 11:20 pm Post subject: tg front cut |
|
|
i have a almost perfect tg front cut, minor rust, never been hit and perfect for upgrading a coupe to tg specs as well as rust repair sections for the boot floor and passenger side floor pan. i only want $80 for the front cut as it has no lights, guards or suspension. email me for more info
cheers |
|
Back to top |
|
|
PiNk_Tx_CoOp tinkerer
Joined: 15 Oct 2001 Posts: 65
|
Posted: Mon Oct 22, 2001 12:04 am Post subject: Re: tg front cut |
|
|
i got a tx coupe. what could u take off that to upgrade it??? |
|
Back to top |
|
|
elky petrol head
Joined: 06 Oct 2001 Posts: 1149
|
Posted: Mon Oct 22, 2001 9:32 pm Post subject: Re: tg front cut |
|
|
basically, u drill the spot welds around front radiator panel to remove it, weld the new panel on and that's it. all the panels will now fit from a later model. If u have rust in the front sills and box sections, then you are better of doing a complete front cut, then u also get the mounts for the late model dash as well. We can do both types of conversions $100 radiator support and $300 for the front cut, the whole front cut is only $80 but really good
cheers |
|
Back to top |
|
|
pisana rice boy
Joined: 05 Oct 2001 Posts: 27
|
Posted: Wed Oct 24, 2001 12:57 pm Post subject: Re: tg front cut |
|
|
Where in australia are you?
phil |
|
Back to top |
|
|
Kizza tinkerer
Joined: 06 Oct 2001 Posts: 440
|
Posted: Wed Oct 24, 2001 8:21 pm Post subject: Re: tg front cut |
|
|
hes in qld on the sunshine coast |
|
Back to top |
|
|
JFK tinkerer
Joined: 05 Oct 2001 Posts: 159
|
Posted: Wed Oct 24, 2001 11:55 pm Post subject: Re: tg front cut |
|
|
if u want a front cut for tg ive got everything including guards bonnet front bar and lower bever and lights and grill in sydney |
|
Back to top |
|
|
|