| View previous topic :: View next topic |
| Author |
Message |
Westy
rice boy
Joined: 16 Nov 2001
Posts: 41
|
 Posted: Tue Nov 20, 2001 4:53 pm Post subject: Bell Housing |
 |
|
| I unbolted the old bell housing on my old gear box and there are bearings and all sorts in there i rang up marlows just to see if i could take it off and he said something about being a complete bell housing :/ who knows anyway so i cant swap the bell housing on my gear box what else could i do the only thing wrong with the gear box is the stater motor is on the wrong side? |
|
| Back to top |
|
 |
CJ
rice boy
Joined: 09 Oct 2001
Posts: 20
|
| Posted: Sun Nov 25, 2001 1:25 am Post subject: Re: Bell Housing |
|
|
i take it you have a twin cam?
we regually change the bellhouseing on ours when we brake the box, the only trick to it is the donour box needs to be the same spline as the box the bell houseing came from and its a straight swap,
the bearing assembly inside the frount of the box is diffrent between the diffrent spline boxs Fine& corse. |
|
| Back to top |
|
|
|
