window winder handle

Paul · tinkerer Joined: 06 Oct 2001 Posts: 54

does anyone know how the hell u get the window winder handle off??? there is supposed to be some clip or something behind it but i can't get to it? any help would be appreciated...

JFK · tinkerer Joined: 05 Oct 2001 Posts: 159

if u get a flat piece of steel and cut the end out of it like like a c shape that will fit over the winder u place it behind it and wiggle the winder and the clip pops out

Paul · tinkerer Joined: 06 Oct 2001 Posts: 54

thanks...i'll try it 2moro

zookie · newbie Joined: 06 Dec 2001 Posts: 5

Use an old hanky - fold it in half and wiggle it from end to end along the open ends of the clip. It will pop out no worries.

FrAsErTaG · tinkerer Joined: 04 Oct 2001 Posts: 166

get 2 skinny flathead screw drivers and pop the clip

Pete · backyard mechanic Joined: 05 Oct 2001 Posts: 502

go to a sterio place, window tinting or pannel beaters and they will SHOW you how to do it, takes 10 seconds to show how to.

CuGem · backyard mechanic Joined: 07 Oct 2001 Posts: 599

get a piece of thin stout wire and bend a hook in the end. push the hook under the arm of the winder and snag the loop of the clip.

murray · rice boy Joined: 08 Oct 2001 Posts: 15

well i used a small allenkey stuck it behind the winder and turned slightly and pulled down and it come off in like 2 seconds