VT Indicators

CopBait · tinkerer Joined: 12 Oct 2001 Posts: 80

Hey everyone, i have got clear VT indicators/repeaters in the front gaurds of my Gem, but i was wondering if anyone knows how to secure them properly? coz i am getting it ready for a roadworthy cert, so i can't exactly take it in with indicators hanging out of the gaurds, any ideas? Thanks

Nick · tinkerer Joined: 04 Oct 2001 Posts: 129

try screwing them in

AZZA · rice boy Joined: 27 Nov 2001 Posts: 32

Na my my had the same problem on his hilux
they r cliped not screwed in so we found some with the clips still intack and then we mad the hole 2 suit

maDGeMvAN · tinkerer Joined: 06 Oct 2001 Posts: 452

Hey, you need to weld up the hole where the normal gemini indicators clip in and get the pattern(shape of hole)for the VT indicators and cut that shape into the gaurds. They should then just clip in with a push and will stay firmly in place.
That's what we have done for my gem. No problems.

GasGem · backyard mechanic Joined: 05 Nov 2001 Posts: 755

Stickaflex. it will stick anything to anything.

CopBait · tinkerer Joined: 12 Oct 2001 Posts: 80

Thanks for all the responses, will give em a try...cheers

CJ · rice boy Joined: 09 Oct 2001 Posts: 20

i cut out some small squares out of metal and stuck them to the inside of the gaurd, so that way i can easily un clip the indicators if i have to.

or if some lowlife decides to flog them they wont cause more damage to the car trying to flog them then there worth

Pete · backyard mechanic Joined: 05 Oct 2001 Posts: 502

hey where did you get them from? how much?

maDGeMvAN · tinkerer Joined: 06 Oct 2001 Posts: 452

You can get the indicators at any holden dealer - spare parts.
I can't remember, but I think they were around $25??