| View previous topic :: View next topic |
| Author |
Message |
LoneWolf_
tinkerer
Joined: 23 Dec 2001
Posts: 159
|
 Posted: Wed Feb 06, 2002 8:51 am Post subject: Torque Wrench Settings |
 |
|
I am helping a friend rebuild his 1600. Can anyway tell me the torque wrench settings and in what stages, to do the crankshaft bolts up to?
Cheers |
|
| Back to top |
|
 |
Fastgem
tinkerer
Joined: 04 Oct 2001
Posts: 166
|
| Posted: Wed Feb 06, 2002 6:21 pm Post subject: Re: Torque Wrench Settings |
|
|
| going from memory i think the main bearing bolts are 98Nm, connecting rod nuts 45Nm, crankshaft pulley bolt 118Nm, cylinder head 68Nm, 81Nm, 98Nm, rocker shaft bracket nuts 25Nm, Flywheel bolts 95Nm. |
|
| Back to top |
|
|
Tooleeda
tinkerer
Joined: 04 Oct 2001
Posts: 93
|
| Posted: Thu Feb 07, 2002 2:24 am Post subject: Re: Torque Wrench Settings |
|
|
| Dont forget to use new nuts on the rod bolts, they are not expensive. |
|
| Back to top |
|
|
Racegem
backyard mechanic
Joined: 30 Jan 2002
Posts: 987
|
| Posted: Thu Feb 07, 2002 3:53 am Post subject: Re: Torque Settings-Fastgem |
|
|
| Memory???!! You had to have been reading that,.....straight out of the Gregory's manual! |
|
| Back to top |
|
|
LoneWolf_
tinkerer
Joined: 23 Dec 2001
Posts: 159
|
| Posted: Thu Feb 07, 2002 9:30 am Post subject: Re: Torque Wrench Settings |
|
|
| Thanks to all that replied. Much appreciated |
|
| Back to top |
|
|
Fastgem
tinkerer
Joined: 04 Oct 2001
Posts: 166
|
| Posted: Thu Feb 07, 2002 2:15 pm Post subject: Re: Torque Settings-Fastgem |
|
|
| gee.. sorry for using my brain. If you really want to get picky though, according to gregorys the rocker shaft brcket nuts should be 24Nm, Flywheel bolts 94Nm and the cylinder head torqued up to 85, 100Nm. |
|
| Back to top |
|
|
Racegem
backyard mechanic
Joined: 30 Jan 2002
Posts: 987
|
| Posted: Thu Feb 07, 2002 8:12 pm Post subject: Re: Torque Settings-Fastgem |
|
|
| only kidding... |
|
| Back to top |
|
|
|
