| View previous topic :: View next topic |
| Author |
Message |
Nick
tinkerer
Joined: 04 Oct 2001
Posts: 129
|
 Posted: Sun Feb 24, 2002 2:39 pm Post subject: 2.6 4ZE1 Rodeo conversion |
 |
|
| Has anyone done this conversion because I am seriously going to do it and have an engine (2wd manual) lined up with computer and everything. I just wanted to know if anyone here has done it and if so what was needed to be done. ie i know that the gemini g/box bolts up to the engine and that the engine mounts are "meant" to be compatible and that its just a bolt up swap. then just wire in the computer and bobs your uncle. Any help is appreciated. |
|
| Back to top |
|
 |
MatMan
tinkerer
Joined: 04 Oct 2001
Posts: 280
|
| Posted: Sun Feb 24, 2002 3:42 pm Post subject: Re: 2.6 4ZE1 Rodeo conversion |
|
|
| Don't forget, the fuel sytem, ie- return line, high pressure efi pump. Also, I'm not positive, but I think you need to use a diesel gem crossmember and mounts, but again I'm not 100% on that. Good luck with the conversion though. |
|
| Back to top |
|
|
Nick
tinkerer
Joined: 04 Oct 2001
Posts: 129
|
| Posted: Mon Feb 25, 2002 12:19 am Post subject: Re: 2.6 4ZE1 Rodeo conversion |
|
|
| yeah. ill get a surge tank but i dont think you need the diesel crossmember but if you do it wouldnt really be a hassle |
|
| Back to top |
|
|
DOHC
rice boy
Joined: 03 Feb 2002
Posts: 49
|
| Posted: Tue Feb 26, 2002 3:25 am Post subject: Re: 2.6 4ZE1 Rodeo conversion |
|
|
I'm pretty sure you don't need the diesel cross member, that's for the g180w/g200w conversion.
Good Luck and let us know how you go.
R. |
|
| Back to top |
|
|
MatMan
tinkerer
Joined: 04 Oct 2001
Posts: 280
|
| Posted: Tue Feb 26, 2002 6:28 pm Post subject: Re: 2.6 4ZE1 Rodeo conversion |
|
|
Ah yeah, thats right  ) |
|
| Back to top |
|
|
|
