| View previous topic :: View next topic |
| Author |
Message |
Badger
tinkerer
Joined: 13 Feb 2002
Posts: 155
|
 Posted: Wed Mar 06, 2002 1:09 pm Post subject: TF doors |
 |
|
| I am thinking of replacing one of my doors which has seen better days, and I am after some advice. I assume that to remove/replace the doors you simply knock out the pins in the hinges with a suitable drift. is there an easy way to do this? do you need a special tool? any advice? |
|
| Back to top |
|
 |
Shark
tinkerer
Joined: 03 Dec 2001
Posts: 226
|
| Posted: Wed Mar 06, 2002 5:45 pm Post subject: Re: TF doors |
|
|
Pull the plastic caps out of the top and bottom of each hinge. Aparently a slide hammer does the job of removing the pins pretty well, but seeing as i didn't have one and a new one costs about $300, i just found a piece of metal that was the same size as the pin and hammered it out.
Sam |
|
| Back to top |
|
|
GasGem
backyard mechanic
Joined: 05 Nov 2001
Posts: 755
|
| Posted: Wed Mar 06, 2002 8:05 pm Post subject: Re: TF doors |
|
|
there is a special tool that goes through the centre of the pin then you attach the handle and hit the shit out of it with a big hammer, about $45 for the tool, any good auto tool shop should be able to help,
Cheers
Eggy |
|
| Back to top |
|
|
|
