| View previous topic :: View next topic |
| Author |
Message |
maDGeMvAN
tinkerer
Joined: 06 Oct 2001
Posts: 452
|
 Posted: Sat Jun 01, 2002 3:58 am Post subject: 2.6L 4ze1 computer? |
 |
|
Does anyone know what computer is used on a rodeo 4ze1?
Would it be able to run a 4zd1 (using 4ze1 injection etc)? |
|
| Back to top |
|
 |
sime
tinkerer
Joined: 27 Oct 2001
Posts: 352
|
| Posted: Sat Jun 01, 2002 2:01 pm Post subject: Re: 2.6L 4ze1 computer? |
|
|
Why not buy a MicroTech MTX8? Costs about $995 and you can just about use it on any fuel injected car. Beats stuffing arround with the stock ECU from the rodeo any day.
Cheers
Simon |
|
| Back to top |
|
|
maDGeMvAN
tinkerer
Joined: 06 Oct 2001
Posts: 452
|
| Posted: Sat Jun 01, 2002 6:48 pm Post subject: Re: 2.6L 4ze1 computer? |
|
|
I'm thinking about using 4ze1 injection on a 4zd1. If I can use the standard rodeo ecu with the rest of the setup (temporary) then I assume for registration purposes they will agree that it meets the emissions requirement for that engine, if not better than with the standard carb.
Also, if I run the original carby setup, I will need to get a TX remote booster for enough clearance. As far as I know, there is no clearance problems with injection (seen 4zc1-T with TC-TG boosters still used).
When I eventually save enough to go down the tUrBo route aswell, then I'd be looking at getting an MTX8 etc, just thinking of a cheap temporary solution.
Cheers. |
|
| Back to top |
|
|
Ben Wight
backyard mechanic
Joined: 04 Oct 2001
Posts: 946
|
| Posted: Sat Jun 01, 2002 7:58 pm Post subject: Re: 2.6L 4ze1 computer? |
|
|
If you want injection, then the 4ZE1 computer and efi hardware will do the trick and be legal, but if you just want to be legal, the standard carb will also do the trick.
Ben Wight |
|
| Back to top |
|
|
|
