View previous topic :: View next topic |
Author |
Message |
TG 1985 backyard mechanic
Joined: 08 Jan 2002 Posts: 550
|
Posted: Sat Jan 04, 2003 7:51 pm Post subject: CROW CAMS High Torque Cam |
|
|
am picking up a a cam for my gem on monday. and want to know if it's really worth the $264 incl. GST that i was quoted.
i have a g161 with a full reco, that is, fully stock, but literally a brand new motor, done about 2000km's since reco. and i am puting in a "High torque cam for standard engines", it's part no. 782506, the one at the top of the screen at the link below. power range 1800 to 5500rpm.
http://www.crowcams.com.au/templates/Catalogue-Gemini-OHC.shtml
my QN is whether it would give noticable power for the low rev range. and any comments from ppl that have used this cam.
thanx. chris. |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Sat Jan 04, 2003 8:48 pm Post subject: Re: CROW CAMS High Torque Cam |
|
|
u got ripped on the caM TRY $215 BRAND NEW with GST.
u should of got the next one the 2000 to 6000 it covers ur driving rev range better |
|
Back to top |
|
|
TG 1985 backyard mechanic
Joined: 08 Jan 2002 Posts: 550
|
Posted: Sat Jan 04, 2003 10:01 pm Post subject: Re: CROW CAMS High Torque Cam |
|
|
where u get it for that, i was quoted that in the crow cams place in melb, cambellfield or sumthin. any1 know where i can get the same thing but cheaper in melb? |
|
Back to top |
|
|
macca_loto tinkerer
Joined: 30 Jul 2002 Posts: 168
|
Posted: Sun Jan 05, 2003 11:07 am Post subject: Re: CROW CAMS High Torque Cam |
|
|
I dont know any prices of these cams but check out camtech they have a range similar to crow cams. www.camtech.com.au |
|
Back to top |
|
|
Scotty G tinkerer
Joined: 28 Jan 2002 Posts: 182
|
Posted: Sun Jan 05, 2003 11:20 am Post subject: Try this mob |
|
|
http://tighecams.com.au/cars.htm
they are in brisbane, but make a mean camshaft and cheap too. i think $75 for a regrind and $185 for a newie. |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Sun Jan 05, 2003 8:12 pm Post subject: Re: CROW CAMS High Torque Cam |
|
|
i got that quote from A1 HI performance in WA.....
should try some performance shops they get good deals |
|
Back to top |
|
|
TDFlaredCoupe tinkerer
Joined: 23 Dec 2002 Posts: 60
|
Posted: Sun Jan 05, 2003 11:58 pm Post subject: Re: CROW CAMS High Torque Cam |
|
|
why dont u get a standard cam re ground to a 30/70 it will rev between 3grand and 7 then. thats the most common cam grind. but a cam wont do a lot if u dont have head work or get ur dissy recureved. |
|
Back to top |
|
|
Frederick Stienheld petrol head
Joined: 05 Sep 2002 Posts: 2719
|
Posted: Mon Jan 06, 2003 4:26 pm Post subject: Re: Try this mob |
|
|
I have a tighe cam in my gem. They're pretty popular around here |
|
Back to top |
|
|
|