View previous topic :: View next topic |
Author |
Message |
76gemini rice boy
Joined: 12 Feb 2003 Posts: 33
|
Posted: Wed Feb 26, 2003 6:54 pm Post subject: How Do You............. |
|
|
Were and how do people hide there engine bay wiring info would be great thanx
Nate |
|
Back to top |
|
|
crazy n disturbed tinkerer
Joined: 23 Jan 2003 Posts: 181
|
Posted: Wed Feb 26, 2003 7:03 pm Post subject: Re: How Do You............. |
|
|
im guessin they hide it inside the guards, not really ne where else u can hide it |
|
Back to top |
|
|
zzz petrol head
Joined: 16 Jan 2002 Posts: 1298
|
Posted: Wed Feb 26, 2003 7:28 pm Post subject: Re: How Do You............. |
|
|
i would rather my wiring in the bay but if you going for the full show look you can weld covers over the wiring
in the guard so it looks like there is no wiring at all
hope that makes sense |
|
Back to top |
|
|
76gemini rice boy
Joined: 12 Feb 2003 Posts: 33
|
Posted: Wed Feb 26, 2003 8:50 pm Post subject: Re: How Do You............. |
|
|
nah it does what weld brackets in the guard you reckon if thats what you think thats sounds good to me thanx heaps
nate |
|
Back to top |
|
|
tx1975 tinkerer
Joined: 21 May 2002 Posts: 321
|
Posted: Wed Feb 26, 2003 11:14 pm Post subject: Re: How Do You............. |
|
|
i have all my wiring hidden under the guards, u take the guards off and get some of the small tags that hold the wiring under the dash off a wreck and weld them to under the wheel arches ( i used about 5 on each side ) then have to drill small new hole for where u want the wiring to lead to the dizzy and things, u can put the starter motor wire through an early model heater hose hole if ur afer all wiring gone, and need a fairly large hole saw to drill holes near the A pillares for the wiring to feed into the cabing so the original rubber seal fits in and weld up the old holes in the corner of the engine bay .
i have all my engine bay smooted to, lot of work so if ur in a rush i wouldnt bother also have trouble finding faults in the wiring if anything goes wrong (harder to get to), u bolt the alternator regulator under the battery upside down and i mounted the coil low on a chassis rail
sorry for the long post hope it helps u . |
|
Back to top |
|
|
HONES petrol head
Joined: 04 Feb 2002 Posts: 1786
|
Posted: Thu Feb 27, 2003 2:52 am Post subject: Re: How Do You............. |
|
|
Get some kinda sorta like -sprinkler hose- stuff.
Its got kinks like a bendy straw but it works nice and snuggly.
Hones |
|
Back to top |
|
|
|