View previous topic :: View next topic |
Author |
Message |
DrIFtA tinkerer
Joined: 13 Mar 2003 Posts: 246
|
Posted: Sun Mar 16, 2003 1:34 pm Post subject: Basic Gemini 1.6L Engine Info |
|
|
CODE = G161Z
COMPRESSION RATIO - TX/TC/TD = 8.7:1
COMPRESSION RATIO - TE/TF/TG = 8.3:1
BORE = 82.00mm
STROKE = 75.00mm
CAPACITY = 1584cc (96.66ci)
POWER - TX Pre ADR27A = 63kw / TX Post ADR27A = 61kw / TC&TD = 61kw / TE-TG = 50kw
TORQUE = 119nm (88lb/ft) @ 3400rpm
COMPRESSION PRESSURE = Minimum 125psi (861kpa)
IDLE SPEED = 700rpm
IGNITION TIMING = 6 deg btdc set at idle speed
DISTRIBUTOR DWELL ANGLE = 50 - 54 deg
FIRING ORDER = 1-3-4-2 ***Gemini distributor spins anti-clockwise***
SPARK PLUGS = NGK BP6ES (NGK BP5ES for tired smokey engines)
SPARK PLUG GAPS = 0.7mm - 0.8mm
VALVE CLEARANCES = Cold: Inlet = 0.15mm / Exhaust = 0.25mm
VALVE CLEARANCES = Hot: Inlet = 0.20mm / Exhaust = 0.30mm
OIL PRESSURE = 7psi (49kpa) at idle
OIL PRESSURE = 47-71psi (390-490kpa) at 2800rpm
SUMP CAPACITY = 3.2 litres without filter
SUMP CAPACITY = 3.6 litres with filter
COOLING SYSTEM CAPACITY = 6 litres
FUEL TANK CAPACITY = 52 litres
Please add to this information for future references
P.S Please try to keep this thread R&D related |
|
Back to top |
|
|
Danny tinkerer
Joined: 10 Oct 2001 Posts: 100
|
Posted: Thu Mar 20, 2003 12:04 am Post subject: Re: Basic Gemini original car information |
|
|
FINAL DRIVE
TX,TC
borg warner 3.89 for all models
TD
holden small salisbury 3.90 all models
TE, TF, TG
Petrol - holden small salisbury 3.90
Diesel - isuzu diff 3.58
hope this helps someone
more info if anyone needs it.
email me dannystewart8@hotmail.com |
|
Back to top |
|
|
TGNVD247 tinkerer
Joined: 04 Nov 2002 Posts: 470
|
Posted: Thu Mar 20, 2003 7:19 pm Post subject: Re: Basic Gemini original car information |
|
|
more please - this is quite interesting |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Wed Mar 26, 2003 8:16 pm Post subject: Re: Basic Gemini original car information |
|
|
there was three radiator changes from the TX to TG. the early model TX's had a slide in radiator that bolted to the bottom of the adiator panel.
TC/TD had a of simaliar size to the TX but it had four bolts holes along the front panel.
TE/TF/TG had the same has the TC/TD but a larger radiator then the previous cars.
Accelator cables
TX
The TX had a push in accelator cable but had two adjustable bolts for the carby
TC-TG had a screw in cable these cables are interchangable between these models as the early models had metal adjusting nuts compared to plastci adjustables. |
|
Back to top |
|
|
ByteMe22 backyard mechanic
Joined: 28 Dec 2001 Posts: 591
|
Posted: Fri Mar 28, 2003 12:45 pm Post subject: Re: Basic Gemini original car information |
|
|
Amount produced.....
TX : Commenced Feb 1975 : 43,099
TC : Commenced Dec 1976 : 17,256
TD : Commenced Mar 1978 : 42,396
TE : Commenced Sept 1979 : 70,562
TF : Commenced Feb 1982 : 28,325
TG : Commenced Mar 1983 : 23,535
RB : Commenced May 1985 : 16,261
From the Holden Heritage 50th Anniversary Book. |
|
Back to top |
|
|
TXcoupe petrol head
Joined: 05 Oct 2001 Posts: 1675
|
Posted: Mon Jun 09, 2003 2:45 pm Post subject: Re: Basic Gemini original car information |
|
|
and the TX had very detailed wiring diagram compared to later model gems |
|
Back to top |
|
|
|