View previous topic :: View next topic |
Author |
Message |
Benjamin backyard mechanic
Joined: 05 Oct 2001 Posts: 525
|
Posted: Thu Apr 03, 2003 5:51 pm Post subject: G200 Tech specs |
|
|
Could someone please point me in the right direction for G200 specs including bore and stroke sizes, main journals and bearing sizes and such?
I need to determine whether the engine I am going to rebuild has been done before and therefore what parts I must order oversize.
Thanx |
|
Back to top |
|
|
Ben Wight backyard mechanic
Joined: 04 Oct 2001 Posts: 946
|
Posted: Thu Apr 03, 2003 7:20 pm Post subject: Re: G200 Tech specs |
|
|
If pistons are oversize, it will say on their top.
Same goes with bearings, their size will be stamped on them, ie std means standard, 0.010 means 10 thou undersize, etc. |
|
Back to top |
|
|
tx1975 tinkerer
Joined: 21 May 2002 Posts: 321
|
Posted: Thu Apr 03, 2003 7:21 pm Post subject: Re: G200 Tech specs |
|
|
all parts that arenrt standard will have there oversizes stamped into them (on top of pistions or back of bearing shells, end of cam shaft ) ie .20 thou = .5mm, u can only bore a G200 60thou safely then walls get to thin. |
|
Back to top |
|
|
|