View previous topic :: View next topic |
Author |
Message |
Tex tinkerer
Joined: 13 Feb 2003 Posts: 163
|
Posted: Tue May 06, 2003 1:11 am Post subject: WTB Head bolts |
|
|
Im chasing down a set of bolts that block the holes left when the air recycling crap is taken off.
Also does anyone know how to connect the pipe from the top of the rocker cover to an after market chrome (style) air cleanre? (I think its a PCV valve) Or another way to vent this valve, that is legal in vic
Thanks heaps
Tex |
|
Back to top |
|
|
Drift_Gemi tinkerer
Joined: 27 Feb 2003 Posts: 101
|
Posted: Tue May 06, 2003 1:26 am Post subject: Re: WTB Head bolts |
|
|
I actually have a small K&N filter on top of the rocker cover outlet. It just slips on and do it up with a clamp. Unfortunately, with excessive high revs, a lot of oil will start to seep through it and onto the rockercover. Im looking at getting an oil catch can made from aluminium and run a pipe from the rocker cover to the catch can, and have the breather filter on top of that. |
|
Back to top |
|
|
Tex tinkerer
Joined: 13 Feb 2003 Posts: 163
|
Posted: Tue May 06, 2003 4:44 pm Post subject: Re: WTB Head bolts |
|
|
Thanks a lot for that let me know how it goes im iterested to know how people solve this problem |
|
Back to top |
|
|
Gene FJ20DET hod rodder
Joined: 06 Oct 2001 Posts: 9163 Location: brisbane
|
Posted: Tue May 06, 2003 6:21 pm Post subject: Re: WTB Head bolts |
|
|
Im chasing down a set of bolts that block the holes left when the air recycling crap is taken off.
take the pollution pipe (with the thred on it) to a machin shop or bearing joint or other similar places, and get copper plugs _________________
|
|
Back to top |
|
|
Racegem backyard mechanic
Joined: 30 Jan 2002 Posts: 987
|
Posted: Tue May 06, 2003 8:48 pm Post subject: Re: WTB Head bolts |
|
|
For less than $10, autObarn have a right angled barb than screws into the bottom plate of your aftermarket air cleaner (after you drill the hole of course) which allows a hose to be hooked up. |
|
Back to top |
|
|
Tex tinkerer
Joined: 13 Feb 2003 Posts: 163
|
Posted: Wed May 07, 2003 4:32 pm Post subject: Re: WTB Head bolts |
|
|
I got a set, thanks everyone who replied.
I got them from a engine reconditioning place they were very friendly and do a lot of work to engines, more race engines
The place is in Melb (west side) and I reccomend it to anyone |
|
Back to top |
|
|
|